| Delta ASDA-A2 Servo Drive |
100 W |
200 W |
400 W |
750 W |
1 kW |
1.5 kW |
2 kW |
3 kW |
4.5 kW |
5.5 kW |
7.5 kW |
11 kW |
15kW |
| Delta ASDA-A2 Servo Drive |
01 |
02 |
04 |
07 |
10 |
15 |
20 |
30 |
45 |
55 |
75 |
1B |
1F |
| Power supply Phase / Boltahe |
Three-phase / Single-phase 220VAC |
3-phase 220VAC |
| Pinahihintulutang Saklaw ng Boltahe |
1-phase / 3-phase 200 ~ 230VAC, -15% ~ 10% |
3-phase 200 ~ 230VAC, -15% ~ 10% |
| Input Current(3PH) (Mga Yunit: Arms) |
0.39 |
1.11 |
1.86 |
3.66 |
4.68 |
5.9 |
8.76 |
9.83 |
17.5 |
19.4 |
26.3 |
48 |
63 |
| Input Current(1PH) (Mga Yunit: Arms) |
0.69 |
1.92 |
3.22 |
6.78 |
8.88 |
10.3 |
– |
– |
– |
– |
– |
– |
– |
| Patuloy na Output Current (Mga Yunit: Arms) |
0.9 |
1.55 |
2.6 |
5.1 |
7.3 |
8.3 |
13.4 |
19.4 |
32.5 |
40 |
47.5 |
54.4 |
70 |
| Sistema ng Paglamig |
Natural na Sirkulasyon ng Hangin |
Paglamig ng Fan |
| Encoder Resolution / Feedback Resolution |
Incremental na encoder: 20-bit ƞGanap na encoder: 17-bit |
| Kontrol ng Main Circuit |
Kontrol ng SVPWM(Space Vector Pulse Width Modulation). |
| Mga Mode ng Pag-tune |
Auto / Manwal |
| Regenerative Resistor |
wala |
Built-in |
Panlabas |
| Max. Input Pulse Frequency (Para lamang sa Non-DMCNET mode) |
Max. 500Kpps / 4Mpps (Line driver), Max. 200Kpps (Bukas na kolektor) |
| Uri ng Pulse (Para lamang sa Non-DMCNET mode) |
Pulse + Direksyon, A phase + B phase, CCW pulse + CW pulse |
| Pinagmulan ng Command |
Panlabas na pulse train (PT mode) (Para lang sa Non-DMCNET mode) / Internal na parameter (PR mode) |
| Smoothing Strategy |
/RZ-SDVV DQG 3-FXUYH ¿OWHU |
| Elektronikong Kagamitan |
Electronic gear N/M maramihang N: 1~32767, M: 1:32767 (1/50 |
| Output ng Analog Monitor |
Maaaring itakda ang signal ng monitor sa pamamagitan ng mga parameter (Hanay ng boltahe ng output: ›8V) |
| Mga Pag-andar na Proteksiyon |
Overcurrent, Overvoltage, Undervoltage, Nag-overheat ang Motor, Regeneration error, Overload, Overspeed, Abnormal pulse control command, Sobra-sobrang deviation, Encoder error, Adjustment error, Emergency stop activated, Reverse/Forward limit switch error, Position sobrang deviation ng full-close control loop, Serial communication error, Input power phase out, Serial, WCN power phase out, Serial, WCN power phase out Mga terminal ng CN2, CN3 |
| Interface ng Komunikasyon |
RS-232 / RS-485 / CANopen / USB / DMCNET |
