| Item |
Cubits |
| Exemplar |
NJ-Pa3001 |
NJ-PD3001 |
| Copia voltage |
C ad CCXL Vac (wide-range), 50/60 HZ |
XXIV VDC |
| Operating voltage et frequency ranges |
LXXXV ad CCLXIV vac, XLVII ad LXIII HZ |
19.2 28.8 VDC |
| Potentiam consummatio |
CXX VA max. |
LX W max. |
|
Inrush current *1 |
Ad C vac:
XX A / VIII MS max. Nam frigus satus ad locus temperatus ad CC vac: XL A / VIII MS max. quia frigus satus ad locus temperatus |
In XXIV VDC:
XXX A / XX MS max. quia frigus satus |
|
Output facultatem *2 |
V VDC, 6.0 A (including copia CPU unitas usura CPU eculeo) V VDC, 6.0 A (usura expansion eculeo)
XXIV VDC, 1.0 A Summa: XXX W MAX. |
| Output Terminal (Service Supple) |
Non provisum |
|
Output Run *3 |
Contact configuratione: spst, non
Switch Capacity: CCL vac, II A (Resistentia onus) CXX vac, 0.5 A (Inductive Lond), XXIV VDC, 2a (Resistentia onus) |
| Replacement Notification Function |
Non provisum |
| Nulla resistitur *4 |
XX Mω min.
(At D VDC) Inter AC externum et GR terminals |
XX Mω min.
(At D VDC) Inter DC externum et GR terminals |
| Dielectric fortitudinem *4*5 |
2,300 VEN 50/60 HZ pro I min inter ac externum et gr terminalibus
Leakage Current: X MA Max. |
1,000 Vac 50/60 HZ ad I min inter DC externum et GR terminals
Leakage Current: X MA Max. |
| Strepitu immunitatem |
II kv in potentia copia linea (conformis ad IEC 61000-4-4.) |
| Vibratio resistentia |
V ad 8.4 HZ, 3.5-mm amplitudine, 8.4 ad CL HZ, accelerationem: 9.8 m / S2 in X, y, et z × coefficient elementum X = totalis C min) (secundum IEC 60068-2-6) |
| Inpulsa resistentia |
CXLVII m / S2 III temporibus inter X, y et z directions (Nullam output unit: C m / S2) (secundum IEC 60068-2-27) |
| Ambientium operating temperatus |
0 ad LV ° C |
| Ambientium operating humiditas |
X% ad XC% (cum non condensationem) |
| Atmosphaera |
Oportet esse a mordax vapores. |
| Ambientium repono temperatus |
-20 ad LXXV ° |
| Grounding |
Minus quam C Ω |
| Praesepes |
CONLUS |
| Pondus |
CDLXX G max. |
CDXC G max. |
|
CPU Rack DIMENSIONS |
174,7 ad 484,7 × XC × XC mm (W × d × h), (non including funibus)
W = LXX (potentia copia unitas) + XC (CPU unitas) + XX × n + XXXI × m + 14.7 (finem operimentum) N sit numerus XXXII-punctum I / o unitates vel / o imperium unitates et m est numerus aliis unitates. |
| Salus mensuras |
Ad secundum Culus, EC Directives, NK, LR, RCM et KC. |
Download in Munuali
