| State relays (S coils) Latched | 1000 points | S0 to S999 |
| State relays (S coils) Initial | 10 points (subset) | S0 to S9 |
| Timers (T) 100 msec | Range: 0 to 3,276.7 sec
200 points | T0 to T199 |
| Timers (T) 10 msec | Range: 0 to 327.67 sec
46 points | T200 to T245 |
| Timers (T) 1 msec | Range: 0 to 32.767 sec
4 point | T246 to T249 |
| Timers (T) 100 msec
retentive | Range: 0 to 3,276.7 sec
6 points | T250 to T255 |
| Counters (C) General | Range: 1 to 32,767 counts
16 points | C0 to C15
Type: 16 bit up counter |
| Latched | 184 points (subset) | C16 to C199
Type: 16 bit up counter |
| General | Range: 1 to 32,767 counts
20 points | C200 to C219
Type: 32 bit bi-directional counter |
| Latched | 15 points (subset) | C220 to C234
Type: 32 bit bi-directional counter |
High speed counters (C) 1 phase | Range: -2,147,483,648 to
+2,147,483,647 counts Select upto four 1 phase counters with a combined counting frequency of 5kHz or less. Alternatively select one 2 phase or A/B phase counter with a counting fre- quency of 2kHz or less. Note all counters are latched | C235 to C240
6 points |
| 1 phase
c/w start stop input | C241, C242 and C244
3 points |
| 2 phase | C246, C247 and C249
3 points |
| A/B phase | C251, C252 and C254
3 points |
General |
7128 points | D0 to D127 & D1000 to D7999
Type: 16 bit data storage register pair for 32 bit device |
Latched |
872 points (subset) | D128 to D999
Type: 16 bit data storage register pair for 32 bit device |
File |
7000 points | D1000 to D6999 set by parameter in 3
blocks of 500 program steps Type: 16 bit data storage register |
| Externally adjusted | Range: 0 to 255
2 points | Data is move from external setting
potentiometers to registers D8030 and D8031) |
| Special | 256 points (inclusive of D8013, D8030
and D8031) | From the range D8000 to D8255
Type: 16 bit data storage register |
| Index | 16 points | V and Z
Type: 16 bit data storage register |
| Pointers with CALL | 128 points | P0 to P127 |
| For use with interrupts |
6 points | I00❑ to I30❑
(rising trigger ❑ = 1, falling trigger ❑ = 0) |
| Nest levels | 8 points for use with MC and MCR | N0 to N7 |
Decimal K | 16 bit: -32,768 to +32,767
32 bit: -2,147,483,648 to +2,147,483,647 |
| Hexadeci-
mal H | 16 bit: 0000 to FFFF
32 bit: 00000000 to FFFFFFFF |
