| Numero ng modelo 3G3RX |
Mga pagtutukoy |
| Kontrol ng motor |
Phase-to-phase sinusoidal pulse na may modulation PWM (Sensorless vector control, close loop vector na may motor feedback, V/F) |
| Control mode |
Bilis, metalikang kuwintas at pag-andar ng indexer |
| Saklaw ng dalas ng output |
0.10 hanggang 400.00 Hz |
| Katumpakan ng dalas |
Halaga ng digital set: ±0.01% ng max. frequencyAnalogue set value: ±0.2% ng max. dalas (25 ±10°C) |
| Resolution ng frequency set value |
Halaga ng digital set: 0.01 HzAnalog input: 12 bit |
| Resolusyon ng dalas ng output |
0.01Hz |
| Pagsisimula ng metalikang kuwintas |
150%/0.3 Hz (sa ilalim ng sensor-less vector control o sensor-less vector control sa 0 Hz)200%/Torque sa 0 Hz (sa ilalim ng sensor-less vector control sa 0Hz, kapag ang laki ng motor na isang ranggo na mas mababa kaysa sa tinukoy ay konektado) |
| Labis na kakayahan |
150%/60 s, 200%/3 s para sa CT; 120%/60 s VT |
| Halaga ng hanay ng dalas |
0 hanggang 10 VDC (10 KW), –10 hanggang 10 VDC (10 KW), 4 hanggang 20 mA (100 W), mga komunikasyon sa EtherCAT |
| Mga Katangian ng V/f |
Ang V/f ay opsyonal na nababago sa mga base frequency na 30 hanggang 400 Hz, V/f braking constant torque, reduction torque, sensor-less vec-tor control, sensor-less vector control sa 0 Hz |
|
Mga signal ng input |
8 terminal, NO/NC switchable, sink/source logic switchable [Terminal function] 8 function ang maaaring mapili mula sa 61. Reverse (RV), Multi-step speed setting binary 1 (CF1), Multi-step speed setting binary 2 (CF2), Multi-step speed setting binary 3 (CF3), Multi-step speed setting binary 4 (JCFG injection binary 4 (JCFG). (DB), 2nd control (SET), 2-step acceleration/deceleration (2CH), Free-run stop (FRS), External trip (EXT), USP function (USP), Commercial switching (CS), Soft lock (SFT), Analog input switching (AT), 3rd control (SET3), Reset (RS), 3-wire start (STA3-STP), 3-wire start (STA3-STP), 3-wire start (STA3-STP) (F/R), PID enabled/disabled (PID), PID integral reset (PIDC), Control gain switching (CAS),
UP/DWN function na pinabilis (UP), UP/DWN function na decelerated (DWN), UP/DWN function data clear (UDC), Forced operator (OPE), Multi-step speed setting bit 1 (SF1), Multi-step speed setting bit 2 (SF2), Multi-step speed setting bit 3 (SF3), Multi-step speed setting bit 4 (SF4), Multi-step speed setting bit 4 (SF4), Multi-step speed setting bit 4 (SF4). (SF5), Multi-step speed setting bit 6 (SF6), Multi-step speed setting bit 7 (SF7), Overload limit switching (OLR), Torque limit enabled (TL), Torque limit switching 1 (TRQ1), Torque limit switching 2 (TRQ2), P/PI switching (PPI), Brake confirmation (BOK), Orientation (ORTI), clearance ng LAD (PCLR), Pulse train position command input permission (STAT), Frequency addition function (ADD), Forced terminal block (F-TM), Torque reference input permission (ATR), Integrated power clear (KHC), Servo ON (SON), Preliminary excita-tion (FOC), Analog command on hold (AHD), Position command selection 1 (CP1), Position command selection 1 (CP1), Position command selection 1 (CP1), Position command selection 1 (CP1), Position command selection (CP3), Zero return limit signal (ORL), Zero return startup signal (ORG), Forward driving stop (FOT), Reverse driving stop (ROT), Speed/Position switching (SPD), Pulse counter (PCNT), Pulse counter clear (PCC), Walang alokasyon (no) |
|
Mga signal ng output |
5 bukas na terminal ng output ng kolektor: NO/NC switchable, sink/source logic switchable 1 relay (SPDT contact) output terminal: NO/NC switchable[Terminal function] 6 na function ang maaaring mapili mula sa 45.
Signal sa panahon ng RUN (RUN), Constant speed arrival signal (FA1), Over set frequency arrival signal (FA2), Overload warning (OL), Sobra PID deviation (OD), Alarm signal (AL), Set-frequency-only arrival signal (FA3), Overtorque (OTQ), Signal sa panahon ng panandaliang power interruption (IP), Signal habang undervoltage (UV), Lampas sa limitasyon ng RUN (TRUN). (RNT), Lumampas sa oras ng Power ON (ONT), Thermal warning (THM), Brake release (BRK), Brake error (BER), 0-Hz signal (ZS), Ex-cessive speed deviation (DSE), Position ready (POK), Itakda ang frequency na lumampas sa 2 (FA4), Itakda ang frequency only 2 (FA5), Overload warning 2 (OL2), Analog FVc, Analog FV Analog FI disconnection detection (FIDc), Analog FE disconnection detection (FEDc), PID FB status output (FBV), Network error (NDc), Logic operation output 1 (LOG1), Logic operation output 2 (LOG2), Logic operation output 3 (LOG3), Logic operation output 4 (LOG4), Logic operation output 5 (LOG5), (LOGic operation output 5 (LOG5), (LOGic operation output 5 (LOG5), Capacitor life warning (WAC), Cooling fan life warning (WAF), Starting contact signal (FR), Fin overheat warning (OHF), Light load detection signal (LOC), Operation ready (IRDY), Forward run (FWR), Reverse run (RVR), Fatal fault (MJA), Window comparator FV (WCFV), Window comparator FIFEFE (WCFI), Alarm code na Window 3 (AC0 hanggang AC3) |
|
Mga karaniwang pag-andar |
V/f libreng setting (7), Upper/lower frequency limit, Frequency jump, Curve acceleration/deceleration, Manual torque boost level/break, Energy-saving operation, Analog meter adjustment, Starting frequency, Carrier frequency adjustment, Electronic thermal function, (libreng setting available), External start/end (frequency/rate), Various input signal, Various na pag-input ng signal, Various na pag-input na signal, Various na pag-input na signal, Various na pag-input na signal, Various na pag-input na signal, Various na pag-input ng signal, Various na pag-input signal Pinababang boltahe startup, Overload na limitasyon, Initialization value setting, Automatic deceleration at power-off, AVR function, Automatic acceleration/deceleration, Auto tuning (Online/Offline), High torque multi-motor operation control (sensor-less vector control ng dalawang monitor na may isang inverter) |
| Mga input ng analog |
Mga analog input 0 hanggang 10 V at –10 hanggang 10 V (10 KW), 4 hanggang 20 mA (100 W) |
| Mga output ng analogue |
Analog boltahe output, Analog kasalukuyang output, Pulse tren output |
| Mga oras ng Accel/Decel |
0.01 hanggang 3600.0 s (pagpili ng linya/kurba) |
| Display |
Status indicator LED's Run, Program, Power, Alarm, Hz, Amps, Volts, %Digital operator: Available para subaybayan ang 23 item, output current, output frequency... |
| Proteksyon sa sobrang karga ng motor |
Electronic Thermal overload relay at PTC thermistor input |
| Agad na overcurrent |
200% ng kasalukuyang na-rate sa loob ng 3 segundo |
| Overload |
150% sa loob ng 1 minuto |
| Sobrang boltahe |
800 V para sa 400 V na uri at 400 V para sa 200 V na uri |
| Panandaliang pagkawala ng kuryente |
Nagdedecelerate upang huminto sa DC bus na kontrolado, baybayin upang huminto |
| Nag-overheat ang cooling fin |
Monitor ng temperatura at pagtuklas ng error |
| Antas ng pag-iwas sa stall |
Pag-iwas sa stall sa panahon ng acceleration, deceleration at pare-pareho ang bilis |
| Kasalanan sa lupa |
Detection sa power on |
| Indikasyon ng pagsingil ng kuryente |
Sa kapag ang boltahe sa pagitan ng P at N ay mas mataas sa 45 V |
| Degree ng proteksyon |
IP20/IP00 |
| Ambient humidity |
90% RH o mas mababa (walang condensation) |
| Temperatura ng imbakan |
–20°C hanggang +65°C (panandaliang temperatura sa panahon ng transportasyon) |
| Temperatura sa paligid |
–10°C hanggang 50°C |
| Pag-install |
Sa loob ng bahay (walang kinakaing gas, alikabok, atbp.) |
| Taas ng pag-install |
Max. 1000 m |
| Panginginig ng boses |
3G3RX-Ao004 hanggang Ao220, 5.9 m/s2 (0.6G), 10 hanggang 55 Hz3G3RX-Ao300 hanggang Bo13K, 2.94 m/s2 (0.3G), 10 hanggang 55 Hz |
