| Delta Asda-A2 Servo Drive |
100 w |
200 w |
400 w |
750 w |
1 kw |
1,5 kW |
2 kw |
3 kW |
4,5 kW |
5,5 kW |
7,5 kW |
11 kw |
15kw |
| Delta Asda-A2 Servo Drive |
01 |
02 |
04 |
07 |
10 |
15 |
20 |
30 |
45 |
55 |
75 |
1b |
1F |
| Fase / tegangan catu daya |
Tiga fase / fase tunggal 220VAC |
3-fase 220VAC |
| Kisaran tegangan yang diizinkan |
1-fase / 3-fase 200 ~ 230vac, -15% ~ 10% |
3 -fase 200 ~ 230VAC, -15% ~ 10% |
| Input Current (3ph) (Unit: Arms) |
0.39 |
1.11 |
1.86 |
3.66 |
4.68 |
5.9 |
8.76 |
9.83 |
17.5 |
19.4 |
26.3 |
48 |
63 |
| Input Current (1ph) (Unit: Arms) |
0.69 |
1.92 |
3.22 |
6.78 |
8.88 |
10.3 |
- - |
- - |
- - |
- - |
- - |
- - |
- - |
| Arus keluaran kontinu (unit: lengan) |
0.9 |
1.55 |
2.6 |
5.1 |
7.3 |
8.3 |
13.4 |
19.4 |
32.5 |
40 |
47.5 |
54.4 |
70 |
| Sistem pendingin |
Sirkulasi Udara Alami |
Pendingin kipas |
| Resolusi / Resolusi Umpan Balik Encoder |
Encoder tambahan: 20-bit ƞAbsolute Encoder: 17-bit |
| Kontrol Sirkuit Utama |
Kontrol SVPWM (Modulasi Lebar Pulsa Vektor Ruang) |
| Mode tuning |
Otomatis / Manual |
| Resistor regeneratif |
Tidak ada |
Bawaan |
Luar |
| Max. Frekuensi pulsa input (hanya untuk mode non-DMCNET) |
Max. 500kpps / 4mpps (driver line), maks. 200kpps (Open Collector) |
| Jenis pulsa (hanya untuk mode non-dmcnet) |
Pulsa + arah, fase fase + B, pulsa CCW + pulsa CW |
| Sumber perintah |
Kereta pulsa eksternal (mode PT) (hanya untuk mode non-DMCNET) / parameter internal (mode PR) |
| Strategi smoothing |
/Rz-sdvv dqg 3-fxuyh ¿owhu |
| Gigi elektronik |
Gigi elektronik N/M multipel n: 1 ~ 32767, m: 1: 32767 (1/50 |
| Output monitor analog |
Sinyal monitor dapat diatur berdasarkan parameter (rentang tegangan output: ›8V) |
| Fungsi pelindung |
Overcurrent, Overvoltage, Undervoltage, Motor overheated, Regeneration error, Overload, Overspeed, Abnormal pulse control command, Excessive deviation, Encoder error, Adjustment error, Emergency stop activated, Reverse/ Forward limit switch error, Position excessive deviation of full-close control loop, Serial communication error, Input power phase loss, Serial communication time out, short circuit protection of U, V, W, and CN1, CN2, terminal CN3 |
| Antarmuka komunikasi |
RS-232 / RS-485 / CANOPEN / USB / DMCNET |
