| Part Number | AJ65SBTB2-8T |
| Number of output points | 8 points |
| Insulation method | Photocoupler |
| Rated load voltage | 12/24 V DC |
| Operating load voltage
range | 10.2 to 26.4 V DC (ripple ratio: within 5 %) |
| Max. load current | 0.5 A/point (when all point 5 are ON: 0.3 A/point)
2.4 A/1 common |
| Max. inrush current | 1.0 A 10 ms or lower |
| Leakage current at OFF | 0.25 mA or lower |
| Voltage drop at ON | 0.3 V or lower (TYP) 0.5 A
0.6 V or lower (MAX) 0.5 A |
| Surge suppression | Zener diode |
| Common wiring method | 8 points/1 common
(terminal block 2-wire type) |
| Number of stations
occupied | 1 station 32 points assignment
(use 8 points) |
| Noise durability | DC type noise voltage 500 Vp-p, noise width 1 ms, noise carrier frequency 25 to 60 Hz (noise simulator condition) |
| Withstand voltage | 500 V AC for 1 minute between all DC external terminals and
ground |
| Insulation resistance | 10 MW or higher, measured with a 500 V DC insulation resistance tester |
| Weight (kg) | 0.18 |
| External wiring system | 7-point 2-piece terminal block (transmission circuit, module power supply terminal), Direct-type 18-point terminal block (I/O power
supply area) (M3 screw) |
| Applicable solderless
terminal | • RAV1.25-3.5 (in conformance with JIS C 2805)
[Applicable wire size: 0.3 to1.25 mm2] |
| • V2-MS3 (Japan Solderless Terminal Mfg. Co., Ltd.), RAP2-3S RAP2-3 (Japan Terminal Co., Ltd.)
• 2-3N, 2-3S (NICHIFU TERMINAL INDUSTRIES Co., Ltd.) |
| [Applicable wire size: 1.25 to 2 mm2] |
Download A Munual
