| Sensing method | Through-beam | Retro-re- flective | Diffuse-reflective | Convergent-reflective |
|
|
|
|
| Model
Item | E3S-2E4 E3S-2E41 | E3S-5E4 E3S-5E41 | E3S-R2E4 E3S-R2E41 | E3S- DS10E4 E3S- DS10E41 | E3S- DS30E41 | E3S- DS30E4S | E3S- LS10XE4 | E3S- LS20XE4 |
| Sensing distance | 2 m | 5 m | 0.1 to 2 m | 100 mm (white paper 50 x 50 mm) | 300 mm
(white paper 100 x 100) | 30 to 100 mm Continuously variable(10 x 10 mm) | 50 to 250 mm Continuously variable(50 x 75 mm) |
|
| Standard sensing object | Opaque: 7- mm dia. min. | Opaque: 11- mm dia. min. | Opaque: 30- mm dia. min. | Transparent, opaque |
|
|
|
|
|
Differential travel |
— |
20% max. of setting distance | 1.5 mm max. at 30 mm10 mm max.
at 100 mm | 5% max. at 50
to 250 mm |
|
|
|
|
| Directional angle | Both emitter and receiver: 3° to 10° | 3° to 10° | — |
|
|
|
|
|
| Light source (wavelength) | Infrared LED (950 nm) | RED LED (660 nm) | Infrared LED (950 nm) |
|
|
|
|
|
| Power supply voltage | 12 to 24 VDC ±10%, ripple (p-p): 10% max. |
|
|
|
|
|
|
|
| Current consumption | 50 mA max.(Emitter: 25 mA max., Receiver: 25 mA max.) | 40 mA max. |
|
|
|
|
|
|
| Control output (solid-state out- put) | Output current: 1.5 to 4 mA, Load current: 80 mA max. (residual voltage: 2 V max.) ➜ Refer to page 4. |
|
|
|
|
|
|
|
| Response time | Operate or reset: 3 ms max. | Operate or reset: 1 ms max. |
|
|
|
|
|
|
| Sensitivity adjustment | With an indicator |
|
|
|
|
|
|
|
| Ambient illumination (Receiver side) * | Incandescent lamp: 3,000 lx max. Sunlight: 10,000 lx max. |
|
|
|
|
|
|
|
| Ambient temperature | Operating: -25 to 55°C, Storage: -40 to 70°C (with no icing or condensation) |
|
|
|
|
|
|
|
| Ambient humidity | Operating: 35% to 85%, Storage: 35% to 95% (with no condensation) |
|
|
|
|
|
|
|
| Insulation resistance | 20 MΩ min. at 500 VDC |
|
|
|
|
|
|
|
| Dielectric strength | 1,000 VAC, 50/60 Hz for 1 min |
|
|
|
|
|
|
|
| Vibration resistance (destruction) | 10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions |
|
|
|
|
|
|
|
| Shock resistance (destruction) | 500 m/s2 3 times each in X, Y, and Z directions |
|
|
|
|
|
|
|
| Degree of protection | IEC IP65 | IEC IP67 | IEC IP65 | IEC IP67 |
|
|
|
|
| Connection method | Pre-wired cable (standard length: 2 m) |
|
|
|
|
|
|
|
| Indicators | Light indicator (red), Stability indicator (green) |
|
|
|
|
|
|
|
