| Type | Red LED | Blue LED | Green LED |
| Model No.
NPN output | FX-411 | FX-411B | FX-411G |
| Model No.
NPN output | FX-412 (Note 2) | FX-412B (Note 2) | FX-412G (Note 2) |
| PNP output | FX-411P | FX-411BP | FX-411GP |
| CE marking directive compliance | EMC Directive, RoHS Directive |
|
|
| Supply voltage | 12 to 24 V DC ±10 % Ripple P-P 10 % or less |
|
|
| Power consumption | <Red LED type>
Normal operation: 960 mW or less (Current consumption 40 mA or less at 24 V supply voltage)
ECO mode: 840 mW or less (Current consumption 35 mA or less at 24 V supply voltage)
<Blue LED / Green LED type>
Normal operation: 720 mW or less (Current consumption 30 mA or less at 24 V supply voltage)
ECO mode: 580 mW or less (Current consumption 24 mA or less at 24 V supply voltage) |
|
|
| Output | <NPN output type>
NPN open-collector transistor
• Maximum sink current: 100 mA
(50 mA, if five, or more, amplifiers are connected in cascade)
• Applied voltage: 30 V DC or less (between output and 0 V)
• Residual voltage: 1.5 V or less
[at 100 mA sink current
(50 mA, if five, or more, amplifiers are connected in cascade)]<PNP output type>
PNP open-collector transistor
• Maximum source current: 100 mA
(50 mA, if five, or more, amplifiers are connected in cascade)
• Applied voltage: 30 V DC or less (between output and +V)
• Residual voltage: 1.5 V or less
[at 100 mA sink current
(50 mA, if five, or more, amplifiers are connected in cascade)] |
|
|
| Response time | 150 μs or less (FAST), 500 μs or less (STD), 4.5 ms or less (U-LG) selectable with setting switch |
|
|
| Operation indicator | Orange LED (lights up when the output is ON) |
|
|
| Stability indicator | Green LED (lights up under stable light received condition or stable dark condition) |
|
|
| Timer function | Incorporated with variable ON-delay / OFF-delay / ONE SHOT timer, switchable either effective or ineffective.
[Timer period (Note 3): 1 ms to 3 sec. approx. (1 to 10 ms: Setting possible in units of 1 ms, 10 to 100 ms: Setting possible in units of 10 ms,
100 to 500 ms: Setting possible in units of 50 ms, 500 ms to 1 sec.: Setting possible in units of 100 ms, 1 to 3 sec.: Setting possible in units of 500 ms)] |
|
|
Automatic interference
prevention function | Incorporated (Up to four sets of fiber heads can be mounted close together. However, U-LG mode is 8 fiber heads.)(Note 4) |
|
|
| Pollution degree | 3 (Industrial environment) |
|
|
| Ambient temperature | –10 to +55 ℃ –14 to +131 ℉
(If 4 to 7 units are connected in cascade: –10 to +50 ℃ +14 to +122 ℉,
if 8 to 16 units are connected in cascade: –10 to +45 ℃ +14 to +113 ℉)
(No dew condensation or icing allowed), Storage: –20 to +70 ℃ –4 to +158 ℉ |
|
|
| Ambient humidity | 35 to 85 % RH, Storage: 35 to 85 % RH |
|
|
| Ambient illuminance | Incandescent light: 3,000 ℓx or less at the light-receiving face |
|
|
| Voltage withstandability | 1,000 V AC for one min. between all supply terminals connected together and enclosure (Note 5) |
|
|
| Insulation resistance | 20 MΩ, or more, with 250 V DC megger between all supply terminals connected together and enclosure (Note 5) |
|
|
| Vibration resistance | 10 to 150 Hz frequency, 0.75 mm 0.030 in double amplitude in X, Y and Z directions for two hours each |
|
|
| Shock resistance | 98 m/s2 acceleration (10 G approx.) in X, Y and Z directions five times each |
|
|
| Emitting element (modulated) | Red LED | Blue LED | Green LED |
| Material | Enclosure: Heat-resistant ABS, Case cover: Polycarbonate |
|
|
| Cable length | Total length up to 100 m 328.084 ft (50 m 164.042 ft for 5 to 8 units, 20 m 65.617 ft for 9 to 16 units) is possible with 0.3 mm2, or more, cable. |
|
|
| Weight | Net weight: 20 g approx., Gross weight: 30 g approx. |
|
|
