| Type | Compact / Connector built-in type |
|
| Type |
| Mounting-compatible with conventional model
(Note 2) |
| NPN output | PM-□65 | PM-□65W |
| PNP output | PM-□65-P | PM-□65W-P |
| CE marking directive compliance | EMC Directive, RoHS Directive |
|
| Sensing range | 6 mm 0.236 in (fixed) |
|
| Minimum sensing object | 0.8 × 1.2 mm 0.031 × 0.047 in opaque object |
|
| Hysteresis | 0.05 mm 0.002 in or less |
|
| Repeatability | 0.01 mm 0.0004 in or less |
|
| Supply voltage | 5 to 24 V DC ±10 % Ripple P-P 10 % or less |
|
| Current consumption | 15 mA or less |
|
| Output | <NPN output type>
NPN open-collector transistor
・Maximum sink current: 50 mA
・Applied voltage: 30 V DC or less (between output and 0 V)
・Residual voltage: 2 V or less (at 50 mA sink current), 1 V or less (at 16 mA sink current)<PNP output type>
PNP open-collector transistor
・Maximum source current: 50 mA
・Applied voltage: 30 V DC or less (between output and + V)
・Residual voltage: 2 V or less (at 50 mA source current), 1 V or less (at 16 mA source current) |
|
| Output operation | Incorporated with 2 outputs: Light-ON / Dark-ON |
|
| Short-circuit protection | Incorporated |
|
| Response time | Under light received condition: 20 μs or less
Under light interrupted condition: 80 μs or less
(Maximum response frequency: 3 kHz) (Note 3) |
|
| Operation indicator | Orange LED (lights up under light received condition) |
|
| Pollution degree | 3 |
|
| Protection | IP40(IEC) |
|
| Ambient temperature | –25 to +55 ℃ –13 to +131 ℉ (No dew condensation or icing allowed), Storage: –30 to +80 ℃ –22 to +176 ℉ |
|
| Ambient humidity | 5 to 85 % RH, Storage: 5 to 95 % RH |
|
| Ambient illuminance | Fluorescent light: 1,000 ℓx at the light-receiving face |
|
| Voltage withstandability | 1,000 V AC for one min. between all supply terminals connected together and enclosure |
|
| Insulation resistance | 20 MΩ, or more, with 250 V DC megger between all supply terminals connected together and enclosure |
|
| Vibration resistance | 10 to 2,000 Hz frequency, 1.5 mm 0.059 in double amplitude (maximum acceleration 196 m/s2) in X, Y and Z directions for two hours each |
|
| Shock resistance | 15,000 m/s2 acceleration (1,500 G approx.) in X, Y and Z directions three times each |
|
| Emitting element | Infrared LED (Peak emission wavelength: 855 nm 0.034 mil, non-modulated) |
|
| Material | Enclosure: PBT, Display section: Polycarbonate |
|
| Cable length | Extension up to total 100 m 328.084 ft is possible with 0.3 mm2, or more, cable. (Note 4) |
|
| Weight | Net weight: 3 g approx., Gross weight: 3 g approx. |
|
