Availability: | |
---|---|
Panasonic Digital Laser Sensor LS-401/-403/-401P LS-401-C2 LS-401P-C2
Digital Laser Sensor LS-400
We can Supply all kinds of Panasonic sensor parts,such as Panasonic Micro Photoelectric Sensors,Panasonic Area Sensor,Panasonic Digital Fiber Sensor,Panasonic Fiber Sensor,Panasonic Laser Sensor,Panasonic Photoelectric Sensor,Panasonic Pressure Sensors and Panasonic Proximity Sensor.
Type | Connector type | Cable type | |
Type | with communication function | Cable type | |
NPN output | LS-401 | LS-403 | LS-401-C2 |
PNP output | LS-401P | – | LS-401P-C2 |
CE marking directive compliance | EMC Directive, RoHS Directive | ||
Supply voltage | 12 to 24 V DC ± 10 % Ripple P-P 10 % or less | ||
Power consumption | Normal operation: 950 mW or less (Current consumption 40 mA or less at 24 V supply voltage) ECO mode: 780 mW or less (Current consumption 33 mA or less at 24 V supply voltage) | ||
Outputs (Output 1, Output 2) | <NPN output type> NPN open-collector transistor ・Maximum sink current: 100 mA (LS-403 is 50 mA) (Note 2) ・Applied voltage: 30 V DC or less (between output and 0 V) ・Residual voltage: 1.5 V or less [at 100 mA (LS-403 is 50 mA) (Note 2) sink current] <PNP output type> PNP open-collector transistor ・Maximum source current: 100 mA (Note 2) ・Applied voltage: 30 V DC or less (between output and +V) ・Residual voltage: 1.5 V or less [at 100 mA (Note 2) source current] | ||
Output operation | Selectable either Light-ON or Dark-ON, with jog switch | ||
Short-circuit protection | Incorporated | ||
Response time | 80 μs or less (H-SP), 150 μs or less (FAST), 500 μs or less (STD), 4 ms or less (U-LG) selectable with jog switch | ||
External input (Laser emission halt Full-auto teaching / Limit teaching) | – | <NPN output type> NPN non-contact input ・Signal condition High: +5 V to +V DC or open, Low: 0 to +2 V DC (source current 0.5 mA or less) ・Input impedance: 10 kΩ approx.<PNP output type> PNP non-contact input ・Signal condition High: +4 V to +V DC (sink current 3 mA or less) Low: 0 to +0.6 V DC or open ・Input impedance: 10 kΩ approx. | |
Operation indicator | Orange LED (lights up when output 1 and output 2 are ON) | ||
Laser emission indicator | Green LED (lights up during laser emission) | ||
Select indicator | Yellow LED (lights up when either output 1 or output 2 is selected) | ||
MODE indicator | RUN: Green LED, TEACH ・ L/D ・ TIMER ・ CUST ・ PRO: Yellow LED | ||
Digital display | 4 digit (green) + 4 digit (red) LED display | ||
Sensitivity setting | Normal mode: 2-level teaching / Limit teaching / Full-auto teaching / Manual adjustment Window comparator mode: Teaching (1-level, 2-level, 3-level) / Manual adjustment Hysteresis mode: Teaching (1-level, 2-level, 3-level) / Manual adjustment Differential mode: 5-level settings (LS-403 has 8-level settings) | ||
Fine sensitivity adjustment function | Incorporated | ||
Timer function | Incorporated with variable ON-delay / OFF-delay / One shot timer, switchable either effective or ineffective. [Timer period: 1 to 9,999 ms approx.(LS-403 is 0.5 to 9,999 ms approx.)] | ||
Automatic interference prevention function | Incorporated [Up to four sets of sensor heads can be mounted close together. (However, disabled when in H-SP mode) (LS-403 is up to two sets when in H-SP mode)] | ||
Ambient temperature | -10 to +55 ℃ +14 to +131 ℉ (If 4 to 7 units are mounted close together: -10 to +50 ℃ +14 to +122 ℉, if 8 to 16 units are mounted close together: -10 to +45 ℃ +14 to +113 ℉) (No dew condensation or icing allowed), Storage: -20 to +70 ℃ 4 to +158 ℉ | ||
Ambient humidity | 35 to 85 % RH, Storage: 35 to 85 % RH | ||
Voltage withstandability | 1,000 V AC for one min. between all supply terminals connected together and enclosure | ||
Insulation resistance | 20 MΩ, or more, with 250 V DC megger between all supply terminals connected together and enclosure | ||
Vibration resistance | 10 to 150 Hz frequency, 0.75 mm 0.030 in double amplitude in X, Y and Z directions for two hours each | ||
Shock resistance | 98 m/s2 acceleration (10 G approx.) in X, Y and Z directions five times each | ||
Material | Enclosure: Heat-resistant ABS, Transparent cover: Polycarbonate, Push button switch: Acrylic, Jog switch: ABS | ||
Cable | – (Note 3) | 0.15 mm2 5-core cabtyre cable, 2 m 6.562 ft long | |
Cable extension | Extension up to total 100 m 328.084 ft is possible with 0.3 mm2, or more, cable. | ||
Weight | Net weight: 15 g approx., Gross weight: 20 g approx. | Net weight: 65 g approx., Gross weight: 75 g approx. |