| Type | Measurement center
200mm type | Measurement center
400mm type |
| NPN output | HG-C1200 | HG-C1400 |
| PNP output | HG-C1200-P | HG-C1400-P |
| Regulatory compliance and certification | EMC Directive, RoHS Directive, FDA Regulations, UL/c-UL certification (Note 4) |
|
| Measurement center distance | 200 mm 7.874 in | 400 mm 15.748 in |
| Measurement range | ±80 mm 3.150 in | ±200 mm 7.874 in |
| Repeatability | 200 μm 7.874 mil | 300 μm 11.811 mil
(Measuring distance 200 to 400 mm 7.874 to 15.748 in)
800 μm 31.496 mil
(Measuring distance 400 to 600 mm 15.748 to 23.622 in) |
| Linearity | ±0.2 % F.S. | ±0.2 % F.S.
(Measuring distance 200 to 400 mm 7.874 to 15.748 in)
±0.3 % F.S.
(Measuring distance 400 to 600 mm 15.748 to 23.622 in) |
| Temperature characteristic | 0.03 % F.S./℃ |
|
| Light source | Red semiconductor laser Class 2 [JIS/IEC/GB/FDA (Note 2)] Max. output: 1 mW, emission peak wavelength: 655 nm 0.026 mil |
|
| Beam diameter (Note 3) | ø300 μm 11.811 mil
approx. | ø500 μm 19.685 mil
approx. |
| Supply voltage | 12 to 24 V DC ±10 %, Ripple P-P 10 % or less |
|
| Power consumption | 40 mA or less (at 24 V DC supply voltage), 65 mA or less (at 12 V DC supply voltage) |
|
| Control output | <NPN output type>
NPN open-collector transistor
• Maximum sink current: 50 mA
• Applied voltage: 30 V DC or less (Between control output to 0V)
• Residual voltage: 1.5 V or less (At 50 mA sink current)
• Leakage current: 0.1 mA or less<PNP output type>
PNP open-collector transistor
• Maximum source current: 50 mA
• Applied voltage: 30 V DC or less (Between control output to +V)
• Residual voltage: 1.5 V or less (At 50 mA source current)
• Leakage current: 0.1 mA or less |
|
| Output operation | Switchable between either Light-ON or Dark-ON |
|
| Short-circuit protection | Incorporated (Auto reset type) |
|
| Analog output | Analog voltage output
• Output range: 0 to 5 V (at alarm: +5.2 V)
• Output impedance: 100ΩAnalog current output
• Output range: 4 to 20mA (at alarm: 0 mA)
• Output impedance: 300Ω or less |
|
| Response time | Switchable between 1.5 ms / 5 ms / 10 ms |
|
| External input | <NPN output type>
NPN non-contact input
• Input conditions
Invalid: +8 to +V DC or Open
Valid: 0 to +1.2 V DC
• Input impedance: 10 kΩ approx.<PNP output type>
PNP non-contact input
• Input conditions
Invalid: 0 to +0.6 V DC or Open
Valid: +4 to +V DC
• Input impedance: 10 kΩ approx. |
|
| Pollution degree | 2 |
|
| Operating altitude | 2,000 m 6561.680 ft or less |
|
|
Protection | IP67 (IEC) |
|
| Ambient temperature | -10 to +45 ℃ -14 to 113 ℉ (No dew condensation or icing allowed),
Storage: -20 to +60 ℃ -4 to 140 ℉ |
|
| Ambient humidity | 35 to 85 % RH, Storage: 35 to 85 % RH |
|
| Ambient illuminance | Incandescent light: 3,000 ℓx or less at the light-receiving face |
|
| Vibration resistance | 10 to 55 Hz (period: 1 min.) frequency, 1.5 mm 0.059 in double amplitude in X, Y and Z directions for two hours each |
|
| Shock resistance | 500 m/s2 acceleration (50 G approx.) in X, Y and Z directions three times each |
|
| Cable | 0.2 mm2 5-core composite cable, 2 m 6.5617 ft long |
|
| Cable extension | Extension up to total 10 m 393.701 ft is possible with 0.3 mm2, or more, cable. |
|
| Material | Enclosure: Aluminum die-cast, Front cover: Acrylic |
|
| Weight | Net weight: 35 g approx. (without cable), 85 g approx. (including cable) |
|
