| Model | DL-EP1*1 |
| Indicator | Link/activity indicator (LINK/ACT): Green LED, Module status indicator (MS): 2-color (green/red) LED,
Network status indicator (NS): 2-color (green/red) LED, Sensor communication indicator (D-bus) 2-color (green/red) LED |
| Connectable sensors | Sensor amplifiers with D-bus support*2 |
| Number of connectable sensor units | Up to 15 units |
|
Compliant functions | Cyclic communication (Implicit messaging)Message communication (Explicit messaging)Compatible with UCMM and Class 3 |
| Number of connections | 64 |
| EtherNet/IPTM specifications
RPI (Transmission cycle) | 0.5 to 10000 ms (0.5 ms unit) |
| EtherNet/IPTMspecifications
Tolerable communication bandwidth forcyclic communication | 6000pps |
| EtherNet/IPTM specifications
Conformance test | Compatible with Version A7 |
| Power voltage | 20 to 30 VDC, including ripple, Ripple (P-P): 10% max. Class 2 (Supplied via connected sensor amplifier) |
| Power consumption | 1500 mW or less (at 30 V 50 mA max) |
| Materials | Main unit case: Polycarbonate |
| Weight | Approx. 70g |
| Model | DL-PN1 |
| Type | PROFINET Network communication unit |
|
Conformance class | Conformance Class A |
| Number of connections | 1 |
| Compliant protocol | LLDP, DCP |
| Update time | 2 to 512 ms |
| Conformance test | V2.2.4 |
| Device type | Data I/O Communication
Record data Communication |
| GSDML Version | Ver. 2.3 |
| Rating
Power voltage | 20 to 30 VDC, including Ripple (P-P) 10 %
(Supplied from the connected sensor amplifier) |
| Weight | Approx. 70 g (Including the connector) |
| Model | DL-PD1 |
| Connectable sensors | Sensor amplifiers with D-bus support*1 |
Number of
connectable
sensor units | 15 units max.*2 |
| Device type | DP-V1 Slave (D-sub 9 pin, Number of the ports: 1) |
| Communication speed | 9.6 kbit/s to 12 Mbit/s |
| Cable length | 9.6 / 19.2 / 45.45 / 93.75 kbit/s : 1200 m
187.5 kbit/s : 1000 m
500 kbit/s : 400 m
1.5 Mbit/s : 200 m
3 / 6 / 12 Mbit/s : 100 m |
| Power voltage | 20 to 30 VDC, including ripple (p-p) 10%
(This voltage is supplied from the connected sensor amplifier.) |
| Power consumption | 1600 mW or less (65 mA max. at 24 V) |
| Materials | Main unit case and dust cover: Polycarbonate PROFIBUS connector: Steel – Nickel plating |
| Weight | Approx. 65 g |
| Model | DL-CL1*1 |
| Supported version | Version 2.00, version 1.10 (switchable) |
|
No. of occupied stations | Version 2.00: 1 station x 8, 2 stations x 8, 4 stations x 2 (switchable), version 1.10: 1 station, 2 stations, 4 stations (switchable) |
| Station type | Remote device station |
| Transmission speed | 156 kbps/625 kbps/2.5 Mbps/5 Mbps/10 Mbps |
| Station number settings | 1 to 64 |
| Power voltage | 20 to 30 VDC, including ripple, Ripple (P-P): 10 % max. Class 2 (Supplied via connected sensor amplifier) |
| Weight | Approx. 80 g |
