| Model | DL-RS1A*1 |
| Synchronization between the transmitter and receiver | Asynchronous |
| Transmission code | ASCII |
| Baud rate | 2,400/4,800/9,600/19,200/38,400 bps selectable (Factory-setting: 9,600 bps) |
| Data bit length | 8 bits/7 bits selectable (Factory-setting: 8 bits) |
| Parity check | None/Even/Odd selectable (Factory-setting: None) |
| Stop bit length | 1 bit |
| Data delimiter | Data reception: automatically recognizes CR or CR+LF
Data transmission: Fixed to CR+LF |
| Indicator | Communication indicator lamp (green x 2), Alarm indicator lamp (red),
Power indicator lamp (green) |
Sensor connection specificationsNumber of
connectable sensor units | Up to 15 units (including main unit) |
| Power voltage | 20 to 30 VDC, including ripple, Ripple (P-P): 10 % max. Class 2 (Supplied via connected sensor amplifier) |
| Power consumption | 25 mA max. |
| Ambient temperature | -10 to +55 °C 14 to 131 °F |
| Relative humidity | 35 to 85 % RH (No condensation) |
| Vibration resistance | 10 to 55 Hz, Double amplitude 1.5 mm 0.06″, 2 hours in each of the X, Y, and Z directions |
| Materials | Case/Polycarbonate |
| Weight | Approx. 53 g |
| Communication method | Full duplex |
| Model | DL-DN1*1 |
|
| Network power supply | 11 to 25 VDC (supplied from DeviceNetTM communication power supply) |
|
| Indicator | Network status indicator: 2-color (green/red) LED, Module status indicator: 2-color (green/red) LED,
Sensor communication indicator: 2-color (green/red) LED |
|
| Connectable sensors | Sensor amplifiers with D-bus support*2 |
|
| Number of connectable sensor units | Up to 15 units |
|
| Compliant functions | Remote I/O communication (polling) Explicit messaging |
|
| Address setting | 0 to 63 (PGM compatible) |
|
| Baud rate (automatically switched) | 500 kbps/250 kbps/125 kbps |
|
| Power voltage | 20 to 30 VDC, including ripple, Ripple (P-P): 10 % max. Class 2 (Supplied via connected sensor amplifier) |
|
| Power consumption | 660 mW or less (at 30 V, 22 mA max.) |
|
| Pollution degree | 2 |
|
| Ambient temperature | -20 to +55 °C -4 to 131 °F (No freezing) |
|
| Relative humidity | 35 to 85 % RH (No condensation) |
|
| Vibration resistance | 10 to 55 Hz, Double amplitude 1.5 mm 0.06″, 2 hours in each of the X, Y, and Z directions |
|
| Materials | Main unit case and dust cover: Polycarbonate, DeviceNetTM connector: Polyamide (plug), PUT (socket) |
|
| Weight | Approx. 80 g |
|
