Availability: | |
---|---|
Mitsubishi CC Link PLC Module AJ65SBTB1-16DT AJ65SBTB1-16DT1 AJ65SBTB1-32DT1
Mitsubishi PLC Controller Module PLC Mitsubishi CC Link Module AJ65 Series
At Coberry we can provide you with a brand Factory new covered by the Original Manufacturers Warranty.
Buying a Used Parts can offer great savings over brand new
Buying a refurbished can offer great savings over brand new
Part Number | AJ65SBTB1-16D1 | ||
Number of input points | 8 points | Number of output points | 16 points |
Insulation method | Photocoupler | Insulation method | Photocoupler |
Rated input voltage | 24 V DC | Rated load voltage | 24 V DC |
Rated input current | Approx. 7 mA | Operating load voltage range | 19.2 to 26.4 V DC(ripple ratio: within 5 %) |
Operating voltage range | 19.2 to 26.4 V DC (ripple ratio: within 5 %) | Max. load current | 0.5 A/point (when all point 5 are ON : 0.225 A/1 point) 3.6 A/common |
Max. simultaneous input points | 100 % | Max. inrush current | 1.0 A 10 ms or lower |
ON voltage/ON current | 14 V or higher/3.5 mA or higher | Leakage current at OFF | 0.25 mA or lower |
OFF voltage/OFF current | 6 V or lower/1.7 mA or lower | Voltage drop at ON | 0.3 V or lower (TYP)0.5 A 0.6 V or lower (MAX)0.5 A |
Input resistance | A pprox. 3.3 k W | Output form | Sink type with overload protection frunction, overvoltage protection function, overheat protection function. |
Input form | Sink type | Surge suppression | Zener diode |
Common wiring method | 16 points/1 common (Terminal block single wire type) | ||
Number of stations occupied | 1 station 32 points assignment (use 16 points) | ||
Noise durability | DC type noise voltage 500 Vp-p, noise width 1 ms, noise carrier frequency 25 to 60 Hz(noise simulator condition) | ||
Withstand voltage | 500 V AC for 1 minute between all DC external terminals and ground | ||
Insulation resistance | 10 M W or higher, measured with a 500 V DC insulation resistance tester between all DC external terminals and ground | ||
Weight (kg) (lb.) | 0.18 (0.4) | ||
External wiring system | 7-point 2-piece terminal block (transmission circuit, module power supply terminal), Direct-type 18-point terminal block (I/O power supply area) (M3 screw) | ||
Applicable solderless terminal | • RAV1.25-3.5(in conformance with JIS-C2805) [Applicable wire size: 0.3 to1.25 mm2] • V2-MS3 (Japan Solderless Terminal Mfg. Co., Ltd.), RAP2-3S RAP2-3SL (Japan Terminal Co., Ltd.) • 2-3N, 2-3S (NICHIFU TERMINAL INDUSTRIES Co., Ltd.) [Applicable wire size: 1.25 to 2 mm2] |
Part Number | AJ65SBTB1-16DT1 | ||
Number of input points | 8 points | Number of output points | 8 points |
Insulation method | Photocoupler | Insulation method | Photocoupler |
Rated input voltage | 24 V DC | Rated load voltage | 24 V DC |
Rated input current | Approx. 5 mA | Operating load voltage range | 19.2 to 26.4 V DC(ripple ratio: within 5 %) |
Operating voltage range | 19.2 to 26.4 V DC (ripple ratio: within 5 %) | Max. load current | 0.5 A/point 2.4 A/common |
Max. simultaneous input points | 100 % | Max. inrush current | 1.0 A 10 ms or lower |
ON voltage/ON current | 15 V or higher/3.0 mA or higher | Leakage current at OFF | 0.25 mA or lower |
OFF voltage/OFF current | 3 V or lower/0.5 mA or lower | Voltage drop at ON | 0.3 V or lower (TYP)0.5 A 0.6 V or lower (MAX)0.5 A |
Input resistance | A pprox. 4.7 k W | Output form | Sink type |
Input form | Sink type | Surge suppression | Zener diode |
Common wiring method | 16 points/1 common (Terminal block single wire type) | ||
Number of stations occupied | 1 station 32 points assignment (use 16 points) | ||
Noise durability | DC type noise voltage 500 Vp-p, noise width 1 ms, noise carrier frequency 25 to 60 Hz(noise simulator condition) | ||
Withstand voltage | 500 V AC for 1 minute between all DC external terminals and ground | ||
Insulation resistance | 10 M W or higher, measured with a 500 V DC insulation resistance tester between all DC external terminals and ground | ||
Weight (kg) (lb.) | 0.18 (0.4) | ||
External wiring system | 7-point 2-piece terminal block (transmission circuit, module power supply terminal), Direct-type 18-point terminal block (I/O power supply area) (M3 screw) | ||
Applicable solderless terminal | • RAV1.25-3.5(in conformance with JIS-C2805) [Applicable wire size: 0.3 to1.25 mm2] • V2-MS3 (Japan Solderless Terminal Mfg. Co., Ltd.), RAP2-3S RAP2-3SL (Japan Terminal Co., Ltd.) • 2-3N, 2-3S (NICHIFU TERMINAL INDUSTRIES Co., Ltd.) [Applicable wire size: 1.25 to 2 mm2] |