| Type | DC-voltage |
|
|
|
| Type |
| With timer |
| With timer |
| Model No. | EQ-511 | EQ-511T | EQ-512 | EQ-512T |
| CE marking directive compliance | EMC Directive, RoHS Directive |
|
|
|
Adjustable range
(Note 2,3) | 0.2 to 2.5 m
0.656 to 8.202 ft | 0.2 to 1.0 m
0.656 to 3.281 ft |
|
|
Sensing range
(at max. setting distance)
(Note 3) | 0.1 to 2.5 m
0.328 to 8.202 ft | 0.1 to 1.0 m
0.328 to 3.281 ft |
|
|
| Hysteresis (Note 3) | 10 % or less of operation distance |
|
|
|
| Supply voltage | 12 to 24 V DC ±10 % Ripple P-P 10 % or less |
|
|
|
Power /
Current consumption | 45 mA or less |
|
|
|
| Output | NPN open-collector transistor
• Maximum sink current: 100 mA
• Applied voltage: 30 V DC or less (between output and 0 V)
• Residual voltage: 1 V or less (at 100 mA sink current), 0.4 V or less (at 16 mA sink current)PNP open-collector transistor
• Maximum source current: 100 mA
• Applied voltage: 30 V DC or less (between output and +V)
• Residual voltage: 1 V or less (at 100 mA source current), 0.4 V or less (at 16 mA source current) |
|
|
|
|
Output operation | Switchable either Detection-ON or Detection-OFF |
|
|
|
| Short-circuit protection | Incorporated |
|
|
|
| Response time | 2 ms or less (For EQ-51□T depends on the setting timer period) |
|
|
|
| Operation indicator | Orange LED (lights up when the output is ON) |
|
|
|
| Stability indicator | Green LED (lights up under stable operating condition) |
|
|
|
| Distance adjuster | 2-turn mechanical adjuster with indicator |
|
|
|
| Sensing mode | Switchable either BGS or FGS function |
|
|
|
| Timer function | – | Incorporated with
variable
(0.1 to 5 sec.)
ON-delay /
OFF-delay timer | – | Incorporated with
variable
(0.1 to 5 sec.)
ON-delay /
OFF-delay timer |
Automatic interference
prevention function | Incorporated (Note 4) |
|
|
|
| Protection | IP67 (IEC) |
|
|
|
| Ambient temperature | –20 to +55 ℃ –4 to +131 ℉ (No dew condensation or icing allowed),
Storage: –30 to +70 ℃ –22 to +158 ℉ |
|
|
|
| Ambient humidity | 35 to 85 % RH, Storage: 35 to 85 % RH |
|
|
|
| Ambient illuminance | Incandescent light: 3,000 Lx or less at the light-receiving face |
|
|
|
| Voltage withstandability | 1,000 V AC for one min. between all supply terminals connected together and enclosure |
|
|
|
| Insulation resistance | 20 MΩ, or more, with 250 V DC megger between all supply terminals connected together and enclosure |
|
|
|
| Vibration resistance | 10 to 55 Hz frequency, 1.5 mm 0.059 in double amplitude in X, Y and Z directions for two hours each |
|
|
|
| Shock resistance | 500 m/s2 acceleration (50 G approx.) in X, Y and Z directions three times each |
|
|
|
| Emitting element | Infrared LED (Peak emission wavelength: 855 nm 0.034 mil, modulated) |
|
|
|
| Receiving element | 2-segment photodiode |
|
|
|
| Material | Enclosure: ABS, Front cover: Polycarbonate, Display cover: Polycarbonate |
|
|
|
| Connection method | Screw-on terminal connection |
|
|
|
| Cable | Suitable for round cable φ9 to φ11 mm φ0.354 to φ0.433 in |
|
|
|
| Cable length | Total length up to 100 m 328.084 ft is possible with 0.3 mm2, or more, cabtyre cable. |
|
|
|
| Weight | Net weight: 85 g approx. |
|
|
|
| Accessory | Adjusting screwdriver: 1 pc. |
|
|
|
