Availability: | |
---|---|
Panasonic Digital Mark Sensor LX-101 LX-101-Z LX-101-P LX-101-P-Z
Panasonic Digital Mark Sensor LX-100
We can Supply all kinds of Panasonic sensor parts,such as Panasonic Micro Photoelectric Sensors,Panasonic Area Sensor,Panasonic Digital Fiber Sensor,Panasonic Fiber Sensor,Panasonic Laser Sensor,Panasonic Photoelectric Sensor,Panasonic Pressure Sensors and Panasonic Proximity Sensor.
Type | Cable type | Plug-in connector type |
NPN output | LX-101 | LX-101-Z |
PNP output | LX-101-P | LX-101-P-Z |
CE marking directive compliance | EMC Directive, RoHS Directive | |
Sensing range | 10 ± 3 mm 0.394 ± 0.118 in | |
Spot size | 1 x 5 mm 0.039 x 0.197 in (at 10 mm 0.394 in setting distance) | |
Supply voltage | 12 to 24 V DC ± 10 % Ripple P-P 10 % or less | |
Current consumption | Normal mode: 750 mW or less (Current consumption 30 mA or less at 24 V supply voltage) ECO mode: 600 mW or less (Current consumption 25 mA or less at 24 V supply voltage) | |
Output 1 (OUT) | <NPN output type> NPN open-collector transistor ・Maximum sink current: 50 mA ・Applied voltage: 30 V DC or less (between output and 0 V) ・Residual voltage: 1.5 V or less (at 50 mA sink current) <PNP output type> PNP open-collector transistor ・Maximum source current: 50 mA ・Applied voltage: 30 V DC or less (between output and +V) ・Residual voltage: 1.5 V or less (at 50 mA source current) | <NPN output type> NPN open-collector transistor ・Maximum sink current: 100 mA ・Applied voltage: 30 V DC or less (between output and 0 V) ・Residual voltage: 1.5 V or less (at 100 mA sink current) <PNP output type> PNP open-collector transistor ・Maximum source current: 100 mA ・Applied voltage: 30 V DC or less (between output and +V) ・Residual voltage: 1.5 V or less (at 100 mA source current) |
Short-circuit protection | Incorporated | |
Output operation | Mark mode: Light-ON / Dark-ON (Auto-setting on teaching), Color mode: Consistent-ON / Inconsistent-ON (Setting on teaching) | |
Output 2 (OUT) | <NPN output type> NPN open-collector transistor ・Maximum sink current: 50 mA ・Applied voltage: 30 V DC or less (between output and 0 V) ・Residual voltage: 1.5 V or less (at 50 mA sink current) <PNP output type> PNP open-collector transistor ・Maximum source current: 50 mA ・Applied voltage: 30 V DC or less (between output and +V) ・Residual voltage: 1.5 V or less (at 50 mA source current) | – |
Response time | Mark mode: 45 μs or less, Color mode: 150 μs or less | |
Teaching input | <NPN output type> NPN non-contact input ・Signal condition: High… +5 V to +V, or open Low… 0 to +2 V (source current: 0.5 mA or less) ・Input impedance: 10 kΩ approx. <PNP output type> PNP non-contact input ・Signal condition: High… +4 V to +V (sink current: 3 mA or less) Low… 0 to +0.6 V, or open ・Input impedance: 10 kΩ approx. | |
Digital display | 4-digit red LED display | |
Sensitivity setting | Mark mode: 2-level teaching / Full-auto teaching, Color mode: 1-level teaching | |
Fine sensitivity adjustment function | Incorporated | |
Timer function | Incorporated with variable ON-delay / OFF-delay timer, switchable either effective or ineffective (Timer period: 1 to 500 ms, 9 levels variable) | |
Protection | IP67 (IEC) | |
Ambient temperature | -10 to +55 ℃ +14 to +131 ℉ (No dew condensation or icing allowed), Storage: -20 to +70 ℃ -4 to +158 ℉ | |
Ambient humidity | 35 to 85 % RH, Storage: 35 to 85 % RH | |
Ambient illuminance | Incandescent light: 3,000 or less lx at the light-receiving face | |
Voltage withstandability | 1,000 V AC for one min. between all supply terminals connected together and enclosure | |
Vibration resistance | 10 to 500 Hz frequency, 3.0 mm 0.118 in double amplitude (max. 20 G) in X, Y and Z directions for two hours each | |
Shock resistance | 500 m/s2 acceleration (50 G approx.) in X, Y and Z directions three times each | |
Emitting element | Combined Red / Green / Blue LEDs (Peak emission wavelength: 640 nm 0.025 mil / 525 nm 0.021 mil / 470 nm 0.019 mil) | |
Material | Enclosure: PBT, Display cover: Polycarbonate, Operation buttons: Silicone rubber, Lens: Glass, Lens holder: Aluminum | |
Cable | 0.34 mm2 5-core cabtyre cable, 2 m 6.562 ft long | (Note 2) |
Cable extension | Extension up to total 100 m 328.084 ft is possible with 0.3 mm2, or more, cable. | |
Weight | Net weight: 120 g approx., Gross weight: 180 g approx. | Net weight: 55 g approx., Gross weight: 120 g approx. |
Accessory | M4 (length 30 mm 1.181 in) screw with washers: 2 pcs. |