| Article number | 6ES7332-5RD00-0AB0 |
| SIMATIC S7,SM 332 ANALOG OUTPUT |
| Supply voltage |
|
| Load voltage L+ |
|
|
● Rated value (DC) | 24 V |
|
● Reverse polarity protection | Yes |
| Input current |
|
| from load voltage L+ (without load), max. | 200 mA |
| from backplane bus 5 V DC, max. | 80 mA |
| Power loss |
|
| Power loss, typ. | 4 W |
| Analog outputs |
|
| Number of analog outputs | 4 |
| Voltage output, short-circuit protection | Yes |
| Voltage output, short-circuit current, max. | 70 mA |
| Current output, no-load voltage, max. | 14 V |
| Output ranges, current |
|
|
● 0 to 20 mA | Yes |
|
● 4 mA to 20 mA | Yes |
| Load impedance (in rated range of output) |
|
|
● with current outputs, max. | 500 Ω |
| Cable length |
|
|
● shielded, max. | 200 m |
| Analog value generation for the outputs |
|
| Integration and conversion time/resolution per channel |
|
|
● Resolution with overrange (bit including sign), max. | 15 bit |
| Errors/accuracies |
|
| Operational error limit in overall temperature range |
|
|
● Current, relative to output range, (+/-) | 0.55 % |
| Basic error limit (operational limit at 25 °C) |
|
|
● Current, relative to output range, (+/-) | 0.2 % |
| Interrupts/diagnostics/status information |
|
| Diagnostics function | Yes |
| Diagnoses |
|
|
● Overrange | Yes |
|
● Wire-break in actuator cable | Yes |
| Diagnostics indication LED |
|
|
● Group error SF (red) | Yes |
|
● Channel fault indicator F (red) | Yes |
| Ex(i) characteristics |
|
| Module for Ex(i) protection | Yes |
| Maximum values of output circuits (per channel) |
|
|
● Co (permissible external capacity), max. | 850 nF |
|
● Io (short-circuit current), max. | 70 mA |
|
● Lo (permissible external inductivity), max. | 6.6 mH |
|
● Po (power of load), max. | 440 mW |
|
● Uo (output no-load voltage), max. | 14 V |
| Potential separation |
|
| Potential separation analog outputs |
|
|
● between the channels | Yes |
|
● between the channels and backplane bus | Yes |
|
● Between the channels and load voltage L+ | Yes |
| Standards, approvals, certificates |
|
| Use in hazardous areas |
|
|
● Type of protection acc. to EN 50020 (CENELEC) | [EEx ib] IIC |
|
● Type of protection acc. to FM | Class I, Division 2, Group A, B, C, D T4 |
|
● Test number PTB | Ex-96.D.2026X |
| Ambient conditions |
|
| Ambient temperature during operation |
|
|
● max. | 60 °C |
| Connection method |
|
| required front connector | 20-pin |
| Dimensions |
|
| Width | 40 mm |
| Height | 125 mm |
| Depth | 120 mm |
| Weights |
|
| Weight, approx. | 280 g |
