| Type | DIN rail mounting |
|
|
| Type | General use | High-performance | Two sensor connection |
| Model No. | NPS-C7 | NPS-CT7 | NPS-C7W |
| Applicable sensors | Photoelectric sensor, inductive proximity sensor, etc., with NPN transistor output or relay output |
|
|
| Supply voltage | 100 to 240 V AC ± 10 % |
|
|
| Power consumption | 6 VA or less |
|
|
| Voltage | 12 V DC ± 10 % (incorporated with short-circuit protection) |
|
|
| Current | 150 mA max. | 130 mA max. | 120 mA max. |
| Output | Relay contact 1c
・Switching capacity:
250 V 3 A AC (resistive load)
・Electrical life:
100,000 switching operations or more
(rated load)(at 1,800 operations/hour)
・Mechanical life:
10 million switching operations or more
(at 36,000 operations/hour)NPN open-collector transistor
・Maximum sink current: 100 mA or less
・Applied voltage: 30 V DC or less
(between output and 0 V)
・Residual voltage:
1 V or less (at 100 mA sink current)
0.4 V or less (at 16 mA sink current) | Relay contact 1c x2
・Switching capacity:
250 V 3 A AC (resistive load)
・Electrical life:
100,000 switching operations or more
(rated load)(at 1,800 operations/hour)
・Mechanical life:
10 million switching operations or more
(at 36,000 operations/hour) |
|
|
Output operation | Switchable normal operation or inverse operation |
|
|
| Response time | Relay contact: 10 ms approx., NPN open-collector transistor: 5 μs or less | 10 ms approx. |
|
|
Power | Red LED (lights up when the power is ON) |
|
|
| Output (Note 2) | Red LED (lights up when the output is ON) |
|
|
| Sensor signal input | – | Red LED
(lights up when the sensor signal
input is effective) | – |
External
synchronization input | – | Red LED
(lights up when the external
synchronization input is effective) | – |
| External synchronization function | Gate trigger | Gate trigger and edge trigger | – |
| Timer function | – | Three function selectable timer
(Timer period: switchable either
40 ms to 1 sec. or 0.4 sec. to 10 sec.) | – |
| Ambient temperature | -10 to +50 ℃ +14 to +122 ℉ (No dew condensation or icing allowed), Storage: -30 to +70 ℃ -22 to +158 ℉ |
|
|
| Ambient humidity | 35 to 85 % RH, Storage: 35 to 85 % RH |
|
|
| Voltage withstandability | 1,500 V AC for one min. between the power and the output terminals |
|
|
| Insulation resistance | 10 MΩ, or more, with 500 V DC megger between the power and the output terminals |
|
|
| Vibration resistance | 10 to 55 Hz frequency, 0.75 mm 0.030 in double amplitude in X, Y and Z directions for two hours each |
|
|
| Shock resistance | 100 m/s2 acceleration (10 G approx.) in X, Y and Z directions two times each |
|
|
| Material | Enclosure: ABS, Terminal block: PBT (Glass fiber reinforced) |
|
|
| Connecting method | Terminal block |
|
|
| Weight | Net weight: 160 g approx. |
|
|
| Accessories | Short bar: 1 pc., NPS-CV (Protection cover): 1 pc., Short-circuit protection plate: 1 pc., Adjusting screwdriver: 1 pc. (NPS-CT7 only) |
|
|
