| Type | Diffused beam type | Spot-beam type |
|
|
| Type |
| Long sensing range |
| With timer |
| Model No. | EX-42 | EX-44 | EX-43 | EX-43T |
| CE marking directive compliance | EMC Directive, RoHS Directive |
|
|
|
| Sensing range | 5 to 38 mm 0.197 to 1.496 in (Conv. point: 20 mm 0.787 in)
with white non-glossy paper (50 x 50 mm 1.969 x 1.969 in) | 10 to 70 mm 0.394 to 2.756 in (Conv. point: 40 mm 1.575 in)
with white non-glossy paper (50 x 50 mm 1.969 x 1.969 in) | 20 to 35 mm 0.787 to 1.378 in (Conv. point: 30 mm 1.181 in)
with white non-glossy paper (50 x 50 mm 1.969 x 1.969 in) |
|
| Min. sensing object | ø0.2 mm ø0.008 in copper wire
(Setting distance: 20 mm 0.787 in) | ø0.2 mm ø0.008 in copper wire
(Setting distance: 40 mm 1.575 in) | ø0.03 mm ø0.001 in gold wire (Setting distance: 30 mm 1.181 in) |
|
| Hysteresis | 15 % or less of operation distance with white non-glossy paper (50 x 50 mm 1.969 x 1.969 in) | 10 % or less of operation distance with white non-glossy paper (50 x 50 mm 1.969 x 1.969 in) |
|
|
Repeatability
(perpendicular to sensing axis) | 0.1 mm 0.004 in or less
(Setting distance: 20 mm 0.787 in) | 0.2 mm 0.008 in or less
(Setting distance: 40 mm 1.575 in) | 0.05 mm 0.002 in or less (Setting distance: 30 mm 1.181 in) |
|
| Supply voltage | 12 to 24 V DC ± 10 % Ripple P-P 10 % or less |
|
|
|
| Current consumption | 35 mA or less |
|
|
|
| Output | NPN open-collector transistor
・Maximum sink current: 100 mA
・Applied voltage: 30 V DC or less (between output and 0 V)
・Residual voltage: 1.5 V or less (at 100 mA sink current)
0.4 V or less (at 16 mA sink current) |
|
|
|
|
Utilization category | DC-12 or DC-13 |
|
|
|
| Output operation | Light-ON |
|
|
|
| Short-circuit protection | Incorporated |
|
|
|
| Response time | 0.5 ms or less |
|
|
|
| Operation indicator | Red LED (lights up when the output is ON) |
|
|
|
| Stability indicator | Green LED
(lights up under stable light received condition or stable dark condition) |
|
|
|
| Sensitivity adjuster | – | Continuously variable adjuster | – |
|
| Timer function | – | Variable OFF-delay timer
(0.1 to 1 sec. approx.) (Note 2) |
|
|
| Pollution degree | 3 (Industrial environment) |
|
|
|
| Protection | IP67 (IEC) |
|
|
|
| Ambient temperature | -25 to +55 ℃ -13 to +131 ℉
(No dew condensation or icing allowed),
Storage: -30 to +70 ℃ -22 to +158 ℉ |
|
|
|
| Ambient humidity | 35 to 85 % RH, Storage: 35 to 85 % RH |
|
|
|
| Ambient illuminance | Incandescent light: 3,000 lx or less at the light-receiving face |
|
|
|
| Voltage withstandability | 1,000 V AC for one min. between all supply terminals connected together and enclosure |
|
|
|
| Insulation resistance | 20 MΩ, or more, with 250 V DC megger between all supply terminals connected together and enclosure |
|
|
|
| Vibration resistance | 10 to 500 Hz frequency, 3 mm 0.118 in double amplitude (20 G max.) in X, Y and Z directions for two hours each |
|
|
|
| Shock resistance | 500 m/s2 acceleration (50 G approx.) in X, Y and Z directions three times each |
|
|
|
| Emitting element | Infrared LED (Peak emission wavelength: 880 nm 0.035 mil, modulated) | Red LED (Peak emission wavelength: 680 nm 0.027 mil, modulated) |
|
|
| Material | Polyalylate |
|
|
|
| Cable | 0.2 mm2 3-core cabtyre cable, 2 m 6.562 ft long |
|
|
|
| Cable extension | Extension up to total 100 m 328.084 ft is possible with 0.3 mm2, or more, cable. |
|
|
|
| Weight | Net weight: 45 g approx., Gross weight: 70 g approx. |
|
|
|
| Accessory | – | Adjusting screwdriver: 1 pc. |
|
|
