| Type | NPN output | PNP output |
| Model No. | EQ-34 | EQ-34-PN |
| CE marking directive compliance | EMC Directive, RoHS Directive |
|
| Adjustable range (Note 2) | 0.2 to 2 m 0.656 to 6.562 ft |
|
Sensing range
(with white non-glossy paper
at setting distance 2 m 6.562 ft) | 0.1 to 2 m 0.328 to 6.562 ft |
|
| Hysteresis | 10 % or less of operation distance (With white non-glossy paper) |
|
| Repeatability | Along sensing axis: 10 mm 0.394 in or less, Perpendicular to sensing axis: 1 mm 0.039 in or less (with white non-glossy paper) |
|
| Supply voltage | 10 to 30 V DC Ripple P-P 10 % or less |
|
| Current consumption | 50 mA or less | 55 mA or less |
| Output | NPN open-collector transistor
• Maximum sink current: 100 mA
• Applied voltage:
30 V DC or less
(between output and 0 V)
• Residual voltage:
1 V or less (at 100 mA sink current)
0.4 V or less (at 16 mA sink current) | PNP open-collector transistor
• Maximum source current: 100 mA
• Applied voltage:
30 V DC or less (between output and +V)
• Residual voltage:
1 V or less (at 100 mA source current)
0.4 V or less (at 16 mA source current) |
|
Utilization category | DC-12 or DC-13 |
|
| Output operation | Switchable either Detection-ON or Detection-OFF |
|
| Short-circuit protection | Incorporated |
|
| Response time | 2 ms or less |
|
| Operation indicator | Red LED (lights up when the output is ON) |
|
| Stability indicator | Green LED (lights up under stable light received condition or stable dark condition) |
|
| Distance adjuster | 2-turn mechanical adjuster with pointer |
|
Automatic interference
prevention function | Incorporated (Note 3) |
|
|
Pollution degree | 3 (Industrial environment) |
|
| Protection | IP67 (IEC) |
|
| Ambient temperature | -20 to +55 ℃ -4 to +131 ℉ (No dew condensation or icing allowed), Storage: -25 to +70 ℃ -13 to +158 ℉ |
|
| Ambient humidity | 35 to 85 % RH, Storage: 35 to 85 % RH |
|
| Ambient illuminance | Incandescent light: 3,000 ℓx or less at the light-receiving face |
| Voltage withstandability | 1,000 V AC for one min. between all supply terminals connected together and enclosure |
|
| Insulation resistance | 20 MΩ, or more, with 250 V megger between all supply terminals connected together and enclosure |
|
| Vibration resistance | 10 to 55 Hz frequency, 1.5 mm 0.059 in double amplitude (10 G max.) in X, Y and Z directions for two hours each |
|
| Shock resistance | 500 m/s2 acceleration (50 G approx.) in X, Y and Z directions three times each |
|
| Emitting element | Infrared LED (Peak emission wavelength: 880 nm 0.035 mil, modulated) |
|
| Material | Enclosure: Polyalylate and Polyethylene terephthalate, Lens: Polyalylate |
|
| Cable | 0.3 mm2 3-core cabtyre cable, 2 m 6.562 ft long |
|
| Cable extension | Extension up to total 100 m 328.084 ft is possible with 0.3 mm2, or more, cable. |
|
| Weight | Net weight: 150 g approx., Gross weight: 200 g approx. |
|
| Accessory | Adjusting screwdriver: 1 pc. |
|
