| Type | Thru-beam |
|
| Type | Standard | Side view |
| Light-ON | CY-111A□ | CY-111VA□ |
| Dark-ON | CY-111B□ | CY-111VB□ |
| CE marking directive compliance | EMC Directive, RoHS Directive |
|
| Sensing range | 15 m 49.213 ft |
|
| Sensing object | φ18 mm φ0.709 in or more opaque object
(Setting distance between emitter and receiver: 15 m 49.213ft) |
|
| Hysteresis | – |
|
| Supply voltage | 12 to 24 V DC ±10 % Ripple P-P 10 % or less |
|
| Current consumption | Emitter: 35 mA or less
Receiver: 35 mA or less |
|
| Output | <NPN output type>
NPN open-collector transistor
• Maximum sink current: 100 mA
• Applied voltage: 24 V DC or less (between output and 0 V)
• Residual voltage: 1.5 V or less
<PNP output type>
PNP open-collector transistor
• Maximum source current: 100 mA
• Applied voltage: 24 V DC or less (between output and +V)
• Residual voltage: 1.5 V or less |
|
| Utilization category | DC-12 or DC-13 |
|
| Short-circuit protection | Incorporated |
|
| Response time | 1 ms or less |
|
| Test input (emission halt) function | Incorporated |
|
| Operation indicator | Yellow LED (lights up when the output is ON)
(incorporated on the receiver for thru-beam type) |
|
| Power indicator | Green LED (lights up when the power is ON)
(incorporated on the emitter) |
|
| Pollution degree | 3 (Industrial environment) |
|
| Protection | IP67 (IEC) |
|
| Ambient temperature | –25 to +55 ℃ –13 to +131 ℉
(No dew condensation or icing allowed), Storage: –40 to +70 ℃ –22 to +158 ℉ |
|
| Ambient humidity | 50 % RH (at +70 ℃ +158 ℉) |
|
| Ambient illuminance | Incandescent light: 5,000 ℓx or less at the light-receiving face |
|
| Voltage withstandability | 500 V AC for one min. between all supply terminals connected together and enclosure |
|
| Vibration resistance | 10 to 55 Hz frequency, 0.5 mm 0.02 in double amplitude in X, Y and Z directions for 1.5 hours each |
|
| Shock resistance | 294 m/s2 acceleration (30 G approx.) in X, Y and Z directions three times each |
|
| Emitting element | Infrared LED (modulated) |
|
|
Peak emission wavelength | 890 nm 0.035 mil |
|
| Material | Enclosure: PBT, Lens: PMMA |
|
Cable
(except for M12 plug-in connection type) | 0.44 mm2 3-core cabtyre cable, 2 m 6.562 ft long |
|
| Cable extension | Extension up to total 10 m 32.808 ft is possible with 0.34 mm2, or more, cable (thru-beam type: both emitter and receiver). |
|
| 2 m cable length type | Emitter/Receiver: 65 g approx. | Emitter/Receiver: 70 g approx. |
| M12 plug-in connector type | Emitter/Receiver: 15 g approx. | Emitter/Receiver: 20 g approx. |
| Accessories | Nut: 4 pcs. |
|
