| Type | Thru-beam |
|
|
|
| Type | Infrared | Red | Green |
|
| Type |
| Long sensing
range |
|
|
| Model No. | RX-M10 | RX-M50 | RX-M2R | RX-500G |
| CE marking directive compliance | EMC Directive, RoHS Directive |
|
|
|
| Sensing range | 10 m
32.808 ft | 50 m
164.042 ft | 2 m
6.562 ft | 500 mm
19.685 in |
| Sensing object | φ10 mm 0.394 in or more opaque object (Note 4) |
|
|
|
| Hysteresis | – |
|
|
|
Repeatability
(perpendicular to
sensing axis) | 0.5 mm 0.020 in or less |
|
|
|
| Supply voltage | 12 to 24 V DC ±10 % Ripple P-P 10 % or less |
|
|
|
| Current consumption | Emitter: 20 mA or less (RX-M50: 25 mA or less),
Receiver: 25 mA or less |
|
|
|
| Sensing output | NPN open-collector transistor
• Maximum sink current: 100 mA
• Applied voltage: 30 V DC or less (between sensing output and 0 V)
• Residual voltage: 2 V or less (at 100 mA sink current), 1 V or less (at 16 mA sink current) |
|
|
|
| Utilization category | DC-12 or DC-13 |
|
|
|
| Output operation | Switchable either Light-ON or Dark-ON |
|
|
|
Short-circuit
protection | Incorporated |
|
|
|
| Self-diagnosis output | NPN open-collector transistor
• Maximum sink current: 50 mA
• Applied voltage: 30 V DC or less (between self-diagnosis output and 0 V)
• Residual voltage: 1.5 V or less (at 50 mA sink current), 1 V or less (at 16 mA sink current) |
|
|
|
| Response time | 1 ms or less |
|
|
|
Test input
(emission halt)
function | Incorporated |
|
|
|
| Operation indicator | Red LED (lights up when the sensing output is ON) |
|
|
|
| Stability indicator | Green LED
(lights up under stable light received condition or stable dark condition) |
|
|
|
| Emitting indicator | Red LED (lights up during beam emission) |
|
|
|
| Sensitivity adjuster | Continuously variable adjuster |
|
|
|
Automatic interference
prevention function | – |
|
|
|
| Pollution degree | 3 (Industrial environmrnt) |
|
|
|
| Protection | IP67 (IEC) |
|
|
|
| Ambient temperature | –25 to +60 ℃ –13 to +140 ℉ (No dew condensation or icing allowed),
Storage: –30 to +70 ℃ –22 to +158 ℉ |
|
|
|
| Ambient humidity | 35 to 85 % RH, Storage: 35 to 85 % RH |
|
|
|
| Ambient illuminance | Incandescent light: 3,500 Lx or less at the light-receiving face |
|
|
|
Voltage
withstandability | 1,000 V AC for one min. between all supply terminals connected together and enclosure |
|
|
|
| Insulation resistance | 20 MΩ, or more, with 250 V DC megger between all supply terminals connected together and enclosure |
|
|
|
| Vibration resistance | 10 to 500 Hz frequency, 1.5 mm 0.059 in double amplitude (10 G max.) in X, Y and Z directions for two hours each |
|
|
|
| Shock resistance | 500 m/s2 acceleration (50 G approx.) in X, Y and Z directions three times each |
|
|
|
Emitting element
(modulated) | Infrared LED | Red LED | Green LED |
|
|
Peak emission
wavelength | 880 nm
0.035 mil | 660 nm
0.026 mil | 570 nm
0.022 mil |
|
| Material | Enclosure: Die-cast zinc alloy,
Indicator cover: Polyethersulphone,
Lens: Polycarbonate |
|
|
|
| Cable | Emitter: 0.15 mm2 3-core oil, heat and cold resistant cabtyre cable, 2 m 6.562 ft long
Receiver: 0.15 mm2 4-core oil, heat and cold resistant cabtyre cable, 2 m 6.562 ft long |
|
|
|
| Cable extension | Extension up to total 100 m 328.084 ft is possible with 0.3 mm2, or more, cable
(thru-beam type: both emitter and receiver). |
|
|
|
| Net weight | Emitter: 70 g approx. (RX-M50: 75 g approx.)
Receiver: 70 g approx. (RX-M50: 75 g approx.) |
|
|
|
| Accessories | MS-RX-1 (Sensor mounting bracket) : 1 set for emitter and receiver
Adjusting screwdriver : 1 pc. |
|
|
|
