| Type | Retroreflective |
|
|
|
| Type |
| With polarizing filters |
|
|
| Type | Standard | Side view | Standard | Side view |
| Light-ON | CY-192A□ | CY-192VA□ | CY-191A□ | CY-191VA□ |
| Dark-ON | CY-192B□ | CY-192VB□ | CY-191B□ | CY-191VB□ |
| CE marking directive compliance | EMC Directive, RoHS Directive |
|
|
|
| Sensing range | 4 m 13.123 ft (Note 2) | 2 m 6.562 ft (Note 2) |
|
|
| Sensing object | φ50 mm φ1.969 in or more opaque, translucent or transparent object (Note 2, 4) | φ50 mm φ1.969 in or more opaque, translucent, transparent or specular object (Note 2, 4) |
|
|
| Hysteresis | – |
|
|
|
| Supply voltage | 12 to 24 V DC ±10 % Ripple P-P 10 % or less |
|
|
|
| Current consumption | 35 mA or less |
|
|
|
| Output | <NPN output type>
NPN open-collector transistor
• Maximum sink current: 100 mA
• Applied voltage: 24 V DC or less (between output and 0 V)
• Residual voltage: 1.5 V or less
<PNP output type>
PNP open-collector transistor
• Maximum source current: 100 mA
• Applied voltage: 24 V DC or less (between output and +V)
• Residual voltage: 1.5 V or less |
|
|
|
|
Utilization category | DC-12 or DC-13 |
|
|
|
| Short-circuit protection | Incorporated |
|
|
|
| Response time | 1 ms or less |
|
|
|
| Test input (emission halt) function | – |
|
|
|
| Operation indicator | Yellow LED (lights up when the output is ON)
(incorporated on the receiver for thru-beam type) |
|
|
|
| Power indicator | – |
|
|
|
| Pollution degree | 3 (Industrial environment) |
|
|
|
| Protection | IP67 (IEC) |
|
|
|
| Ambient temperature | –25 to +55 ℃ –13 to +131 ℉
(No dew condensation or icing allowed), Storage: –40 to +70 ℃ –22 to +158 ℉ |
|
|
|
| Ambient humidity | 50 % RH (at +70 ℃ +158 ℉) |
|
|
|
| Ambient illuminance | Incandescent light: 5,000 ℓx or less at the light-receiving face |
|
|
|
| EMC | EN 60947-5-2 |
|
|
|
| Voltage withstandability | 500 V AC for one min. between all supply terminals connected together and enclosure |
|
|
|
| Vibration resistance | 10 to 55 Hz frequency, 0.5 mm 0.020 in double amplitude in X, Y and Z directions for 1.5 hours each |
|
|
|
| Shock resistance | 294 m/s2 acceleration (30 G approx.) in X, Y and Z directions three times each |
|
|
|
| Emitting element | Infrared LED (modulated) | Red LED (modulated) |
|
|
|
Peak emission wavelength | 875 nm 0.034 mil | 665 nm 0.026 mil |
|
|
| Material | Enclosure: PBT, Lens: PMMA |
|
|
|
Cable
(except for M12 plug-in connection type) | 0.44 mm2 3-core cabtyre cable, 2 m 6.562 ft long |
|
|
|
| Cable extension | Extension up to total 10 m 32.808 ft is possible with 0.34 mm2, or more, cable (thru-beam type: both emitter and receiver). |
|
|
|
|
2 m cable length type | 65 g approx. | 70 g approx. | 65 g approx. | 70 g approx. |
| M12 plug-in connector type | 15 g approx. | 20 g approx. | 15 g approx. | 20 g approx. |
| Accessories | Nut: 2 pcs. |
|
|
|
