Article number | 6ES7547-1JF00-0AB0 |
| S7-1500, CM 8xIO-Link |
General information |
|
Product type designation | CM 8xIO-Link |
HW functional status | FS01 |
Firmware version | V1.0.0 |
● FW update possible | Yes |
Product function |
|
● I&M data | Yes; I&M0 to I&M3 |
Engineering with |
|
● STEP 7 TIA Portal configurable/integrated from version | V15.1 with HSP 274 |
● STEP 7 configurable/integrated from version | Configurable via GSD file |
● PROFIBUS from GSD version/GSD revision | GSD as of Revision 5 |
● PROFINET from GSD version/GSD revision | GSDML V2.34 |
Supply voltage |
|
Type of supply voltage | 24 V DC |
Rated value (DC) | 24 V |
permissible range, lower limit (DC) | 20.4 V |
permissible range, upper limit (DC) | 28.8 V |
Reverse polarity protection | Yes |
Input current |
|
Current consumption, max. | 50 mA; without load |
Encoder supply |
|
Number of outputs | 8 |
Output current |
|
● Rated value | 1 A; 4 A total current per module |
24 V encoder supply |
|
● Short-circuit protection | Yes; per channel, electronic |
IO-Link |
|
Number of ports | 8 |
● of which simultaneously controllable | 8 |
IO-Link protocol 1.0 | Yes |
IO-Link protocol 1.1 | Yes |
Cycle time, min. | 2 ms |
Size of process data, input per port | 33 byte; max. |
Size of process data, input per module | 240 byte; max. |
Size of process data, output per port | 32 byte; max. |
Size of process data, output per module | 240 byte; max. |
Memory size for device parameter | 2 kbyte; for each port |
Master backup | Yes |
Configuration without S7-PCT | Yes |
Cable length unshielded, max. | 20 m |
Operating modes |
|
● IO-Link | Yes |
● DI | Yes |
● DQ | No |
Time Based IO |
|
— TIO IO-Link IN | No |
— TIO IO-Link OUT | No |
— TIO IO-Link IN/OUT | No |
Connection of IO-Link devices |
|
● Port type A | Yes |
● Port type B | Yes; 24 V DC via external terminal |
Interrupts/diagnostics/status information |
|
Alarms |
|
● Diagnostic alarm | Yes; The port diagnosis is available in the IO-Link mode only. |
Diagnoses |
|
● Monitoring the supply voltage | Yes |
● Wire-break | Yes |
● Short-circuit | Yes |
● Group error | Yes |
Diagnostics indication LED |
|
● Monitoring of the supply voltage (PWR-LED) | Yes; green LED |
● Channel status display | Yes; green LED |
● for channel diagnostics | Yes; red LED |
● for module diagnostics | Yes; red LED |
Potential separation |
|
Potential separation channels |
|
● between the channels | No |
● between the channels and backplane bus | Yes |
Isolation |
|
Isolation tested with | 707 V DC (type test) |
Ambient conditions |
|
Ambient temperature during operation |
|
● horizontal installation, min. | 0 °C |
● horizontal installation, max. | 60 °C; Observe derating |
● vertical installation, min. | 0 °C |
● vertical installation, max. | 40 °C; Observe derating |
Altitude during operation relating to sea level |
|
● Installation altitude above sea level, max. | 5 000 m; Restrictions for installation altitudes > 2 000 m, see manual |
