| Article number | 6ES7522-1BH01-0AB0 | 6ES7522-1BL01-0AB0 | 6ES7522-1BF00-0AB0 | 6ES7522-5EH00-0AB0 |
| S7-1500, DQ 16x24V DC/0.5A HF | S7-1500, DQ 32x24VDC/0.5A HF | S7-1500, DQ 8x24VDC/2A HF | S7-1500, DQ 16×24…48VUC/125VDC/0.5A ST |
| General information |
|
|
|
|
| Product type designation | DQ 16x24VDC/0.5A HF | DQ 32x24VDC/0.5A HF | DQ 8x24VDC/2A HF | DQ 16×24 … 48 V UC/125 V DC/0.5 A ST |
| HW functional status | From FS02 | From FS02 | FS03 | FS02 |
| Firmware version | V1.1.0 | V1.1.0 | V2.2.0 | V1.0.0 |
|
● FW update possible | Yes |
| Yes | Yes |
| Product function |
|
|
|
|
|
● I&M data | Yes; I&M0 to I&M3 | Yes; I&M0 to I&M3 | Yes; I&M0 to I&M3 | Yes; I&M0 to I&M3 |
|
● Isochronous mode | Yes | Yes | No | No |
|
● Prioritized startup | Yes | Yes | Yes | Yes |
| Engineering with |
|
|
|
|
|
● STEP 7 TIA Portal configurable/integrated from version | V13 SP1 / – | V13 SP1 / – | V13 SP1 / – | V13 SP1 / – |
|
● STEP 7 configurable/integrated from version |
|
| V5.5 SP3 / – | V5.5 SP3 / – |
|
● PROFIBUS from GSD version/GSD revision | V1.0 / V5.1 | V1.0 / V5.1 | V1.0 / V5.1 | V1.0 / V5.1 |
|
● PROFINET from GSD version/GSD revision | V2.3 / – | V2.3 / – | V2.3 / – | V2.3 / – |
| Operating mode |
|
|
|
|
|
● DQ | Yes | Yes | Yes | Yes |
|
● DQ with energy-saving function | No | No | Yes; with an application | No |
|
● PWM | No | No | Yes | No |
|
● Cam control (switching at comparison values) | No | No | No | No |
|
● Oversampling | No | No | No | No |
|
● MSO | Yes | Yes | Yes | Yes |
|
● Integrated operating cycle counter | Yes | Yes | Yes | No |
| Supply voltage |
|
|
|
|
| Rated value (DC) | 24 V | 24 V | 24 V |
|
| permissible range, lower limit (DC) | 20.4 V | 20.4 V | 20.4 V |
|
| permissible range, upper limit (DC) | 28.8 V | 28.8 V | 28.8 V |
|
| Reverse polarity protection | Yes; through internal protection with 7 A per group | Yes; through internal protection with 7 A per group | Yes; through internal protection with 10 A per group |
|
| Input current |
|
|
|
|
| Current consumption, max. | 30 mA | 60 mA | 40 mA; 20 mA per group, no output is activated. |
|
| Output voltage |
|
|
|
|
| Rated value (DC) | 24 V | 24 V | 24 V | 24 V; 48 V, 125 V |
| Rated value (AC) |
|
|
| 24 V; 48 V (50 – 60 Hz) |
| Power |
|
|
|
|
| Power available from the backplane bus | 1.1 W | 1.1 W | 0.9 W | 2 W |
| Power loss |
|
|
|
|
| Power loss, typ. | 2 W | 3.5 W | 5.6 W; 6.8 W for PWM operation | 3.8 W |
| Digital outputs |
|
|
|
|
| Type of digital output | Transistor | Transistor | Transistor | Transistor |
| Number of digital outputs | 16 | 32 | 8 | 16 |
| Current-sinking |
|
|
| Yes |
| Current-sourcing | Yes | Yes | Yes | Yes |
| Digital outputs, parameterizable | Yes | Yes | Yes | Yes |
| Short-circuit protection | Yes; Clocked electronically | Yes; Clocked electronically | Yes |
|
|
● Response threshold, typ. | 1 A | 1 A | 3 A |
|
| Limitation of inductive shutdown voltage to | L+ (-53 V) | L+ (-53 V) | -17 V | 200 V (suppressor diode) |
| Controlling a digital input | Yes | Yes | Yes | Yes |
| Digital output functions, parameterizable |
|
|
|
|
|
● Freely usable digital output |
|
| Yes |
|
|
● PWM output |
|
| Yes |
|
|
— Number, max. |
|
| 2 |
|
|
— Cycle duration, parameterizable |
|
| Yes; 2 … 100 ms continuous |
|
|
— ON period, min. |
|
| 0 % |
|
|
— ON period, max. |
|
| 100 % |
|
|
— Resolution of the duty cycle |
|
| 0.1 % |
|
|
— Minimum pulse duration |
|
| 300 µs |
|
| Switching capacity of the outputs |
|
|
|
|
|
● with resistive load, max. | 0.5 A | 0.5 A |
| 0.5 A |
|
● on lamp load, max. | 5 W | 5 W | 10 W | 40 W; At 125 V DC, 10 W at 48 V UC, 5 W at 24 V UC |
| Load resistance range |
|
|
|
|
|
● lower limit | 48 Ω | 48 Ω | 12 Ω |
|
|
● upper limit | 12 kΩ | 12 kΩ | 4 kΩ |
|
| Output voltage |
|
|
|
|
|
● for signal “1”, min. | L+ (-0.8 V) | L+ (-0.8 V) | L+ (-0.8 V) | L+ (-1.0 V) |
| Output current |
|
|
|
|
|
● for signal “1” rated value | 0.5 A | 0.5 A | 2 A | 0.5 A |
|
● for signal “1” permissible range, max. | 0.5 A | 0.5 A | 2.4 A; note derating specification for PWM operation | 0.6 A |
|
● for signal “0” residual current, max. | 0.5 mA | 0.5 mA | 0.5 mA |
|
| Output delay with resistive load |
|
|
|
|
|
● “0” to “1”, typ. |
|
| 80 µs |
|
|
● “0” to “1”, max. | 100 µs | 100 µs | 100 µs | 5 ms |
|
● “1” to “0”, typ. |
|
| 300 µs |
|
|
● “1” to “0”, max. | 500 µs | 500 µs | 500 µs | 5 ms |
| Parallel switching of two outputs |
|
|
|
|
|
● for logic links | Yes | Yes | Yes | Yes |
|
● for uprating | No | No | No | No |
|
● for redundant control of a load | Yes | Yes | Yes | Yes |
