| Type | Long sensing range |
|
|
| Type |
| Different frequency |
|
| Model No. | GL-18HL | GL-18HLI | GL-18HLB |
| CE marking directive compliance | EMC Directive, RoHS Directive |
|
|
Max. operation distance
(Note 2) | 12 mm 0.472 in ± 10 % |
|
|
Stable sensing range
(Note 2) | 0 to 10 mm 0 to 0.394 in |
|
|
| Standard sensing object | Iron sheet 40 x 40 x t 1 mm
1.575 x 1.575 x t 0.039 in |
|
|
| Hysteresis | 15 % or less of operation distance
(with standard sensing object) |
|
|
| Supply voltage | 10 to 30 V DC Ripple P-P 10 % or less |
|
|
| Current consumption | 10 mA or less |
|
|
| Output | NPN open-collector transistor
– Maximum sink current: 100 mA
– Applied voltage: 30 V DC or less (between output and 0 V)
– Residual voltage: 1.5 V or less (at 100 mA sink current)
0.4 V or less (at 16 mA sink current) |
|
|
|
Utilization category | DC-12 or DC-13 |
|
|
| Output operation | Normally open | Normally closed |
|
| Max. response frequency | 500Hz |
|
|
| Operation indicator | Red LED (lights up when the output is ON) |
|
|
| Pollution degree | 3 (Industrial environment) |
|
|
| Protection | IP67 (IEC), IP67G (Note 3) |
|
|
| Ambient temperature | -25 to +70 ℃ -13 to +158 ℉,
Storage: -25 to +70 ℃ -13 to +158 ℉ |
|
|
| Ambient humidity | 45 to 85 % RH, Storage: 45 to 85 % RH |
|
|
| Voltage withstandability | 1,000 V AC for one min. between all supply terminals connected together and enclosure |
|
|
| Insulation resistance | 50 MΩ, or more, with 250 V DC megger between all supply terminals connected together and enclosure |
|
|
| Vibration resistance | 10 to 55 Hz frequency, 1.5 mm 0.059 in double amplitude in X, Y and Z directions for two hours each |
|
|
| Shock resistance | 1,000 m/s2 acceleration (100 G approx.) in X, Y and Z directions three times each |
|
|
| Cable | 0.3 mm2 3-core oil resistant cabtyre cable, 1 m 3.281 ft long |
|
|
| Cable extension | Extension up to total 100 m 328.084 ft is possible with 0.3 mm2, or more, cable. |
|
|
| Weight | Net weight : 45 g approx. |
|
|
| Accessory | MS-GL18HL (Sensor mounting bracket): 1 set |
|
|
