Availability: | |
---|---|
Keyence Digital Ultrasonic Sensors FW-H02 FW-H07 FW-H10R FW-V20 FW-V20P
We can Supply all kinds of Keyence sensor parts,such as Keyence Digital Laser Sensors,Keyence Vision Sensors,Keyence Fiber Optic Sensors,Keyence Inductive Proximity Sensors,Keyence Photoelectric Sensors,Keyence Positioning Sensors and So on.
Model | FW-H02 | FW-H07 | FW-H10R |
Type | Standard type | Long range | |
Detecting area | 50 to 200 mm 2.0″ to 7.9″*1 | 150 to 700 mm 5.9″ to 27.6″*1 | 150 to 1000 mm 5.9″ to 39.4″*1 |
Response speed | 250 ms | 300 ms | 1,000 ms |
Temperature characteristics | 0.25% of F.S./°C *2*3 | 0.06% of F.S./°C*4 | |
Indicator lamp | Operation indicator (orange) x1 (Turns on when the power is turned on.) | Operation indicator (orange) x1 (Turns on when the target is within the detecting range.) | |
Dimensions | M18 x P1, Length= 63.5 mm 2.50″ | M18 x P1, Length= 104 mm 4.09″ | |
Enclosure rating | IP67 | ||
Ambient temperature | -25 to +70 °C -13 to 158 °F (No freezing) | ||
Relative humidity | 35 to 85 % RH (No condensation) | ||
Vibration resistance | 10 to 55 Hz, Double amplitude 1.5 mm 0.06″, 2 hours in each of the X, Y, and Z axis | ||
Material | Brass-nickel plating, PBT, Polyurethane, Polyamide resin | ||
Accessories | M18 nut: 2, Head cable: 2 m 6.6′, Standard Mounting Bracket (FW-B01) | ||
Weight | Approx. 89 g | Approx. 106 g |
Model | FW-V20 | FW-V20P | FW-V25 | FW-V25P |
Type | NPN | PNP | NPN | PNP |
Rating Power voltage | 24 VDC, ripple (P-P): 10% or less | |||
Normal | 1680 mW (70 mA) or less*1 | |||
Power save | 1370 mW (57 mA) or less*1 | |||
Normal | 2640 mW (110 mA) or less*1 | |||
Power save | 2330 mW (97 mA) or less*1 | |||
Display power | Dual row display with signed 3-digit 7-segment LED (character height: upper characters: 8 mm 0.32″, red; lower characters: 5.7 mm 0.22″, green), display update cycle: 10 times/sec. (5 times/sec. when averaging the display) | |||
Operation status indicators | Red LED × 2 (corresponding to control output 1 and control output 2), green LED × 2 (display channel indicators) | |||
Chattering prevention function | Off, 0.5, 1, 2, 5, 10 s selectable (When the FW-H10R is connected, this is selectable between off, 1, 2, 5, and 10 s.) | |||
Bank/external shift input | No-voltage input (with contacts, without contacts), input time: 25 ms or more (switchable with analog output) | |||
Control output | Maximum NPN open-collector output: 100 mA (40 V or less), residual voltage: 1 V or less, 2 outputs (N.O./N.C. switchable) | Maximum PNP open-collector output: 100 mA (30 V or less), residual voltage: 1 V or less, 2 outputs (N.O./N.C. switchable) | Maximum NPN open-collector output: 100 mA (40 V or less), residual voltage: 1 V or less, 2 outputs (N.O./N.C. switchable) | Maximum PNP open-collector output: 100 mA (30 V or less), residual voltage: 1 V or less, 2 outputs (N.O./N.C. switchable) |
Protection circuit | Reverse polarity protection, overcurrent protection, surge absorption | |||
Analog output | 4 to 20 mA, maximum load resistance: 260 Ω (Bank/external shift input/analog output selectable) | |||
Ambient temperature | -10 to +55 °C 14 to 131 °F (No freezing) | |||
Relative humidity | 35 to 85 % RH (No condensation) | |||
Vibration resistance | 10 to 55 Hz, Double amplitude 1.5 mm 0.06″, 2 hours in each of the X, Y, and Z axis | |||
Material | Main unit and cover: polycarbonate, key tops: elastomer | |||
Accessories | Mounting bracket, power cable, instruction manual | Panel mounting bracket, Protective front cover, Power cable, Instruction manual | ||
Weight | Approx. 85 g (Including a 6.6′ 2-m power cable) |